Search the Community
Showing results for tags 'duratec' or 'sump'.
Found 19 results
-
Duratec valve cover, gaskets and bolts. Brand new never fitted - £80 Collection from Reading
-
SOLD - Westfield SEIW - High Spec 254bhp 2L Duratec track focused car
SimonUK posted a topic in Westfields for Sale
The time has come to sell my high spec road-legal, track focused, 2 Litre Duratec powered Westfield. I have owned the car for the last 4 years. Although predominantly a track car it is fully road-legal and I regularly attend the local WSCC meets. The car originally started off life with a Zetec engine. However in 2015 the previous owner took the car to Northampton Motorsport where a fully rebuilt Duratec engine was supplied and installed. Northampton motorsport also refreshed the car with a new fuel system, new cooling system, rewire with new dashboard, and a full suspension setup. They also ran in the new engine, followed by a rolling road tune where it produced 254bhp and 187lb-ft (254Nm) of torque. A large number of receipts are available for this work totalling over £13500. The car has covered just over 3000 trouble free miles with the new engine. Weighing just 545kg and running 254bhp the car is extremely quick on track. Having been setup by Troy at NMS the car is a joy to drive.. The handling is very predictable which inspires great confidence. Having owned a number of track cars this is by far the quickest and most enjoyable car I have driven on track. There is nothing quite like it. I have regularly serviced the car using only Millers Nanodrive NT+ oil every few hundred miles. The car comes with 12 months MOT unit November 2022 - No advisories on last MOT. Current engine mileage is 3050 with approximately 8600 miles on the chassis. There have been 4 previous owners. I’ve listed the specs below. As you can see no expense has been spared. Included with the car is a huge folder of receipts and history. Engine - 254bhp Rebuilt and installed by NMS - 2015 (Receipts provided) Has covered 3000 miles since install. 2.ltr Duratec SBD cams Vernier pulleys Uprated springs and retainers Ported head Standard valves SBD Omega pistons CR 12.5:1 SBD Carillo rods Standard crank Lightened and balanced Pace dry sump system Titan 4 KG flywheel AP twin plate paddle clutch Lightweight denso alternator Jenvey throttle body kit - including air horns, inlet manifold and fuel rail. Bosch 450 cc injectors New piston rings, bearings, timing chain and tensioners. Omex 600 ECU Exhaust Simpson full exhaust system and manifold. - £1800 Measures around 98dB static - No issues with the driveby at Bedford (One of the strictest tracks) Cooling Radtec aluminium radiator Oil cooler SPAL Fan Oil temp never exceeds 100C on track even on the hottest of days. Fuel System - Installed 2015 30 litre fuel tank Swirl pot Facet redtop Low pressure fuel pump High pressure fuel pump Gearbox - Rebuilt 2015 - Including all new seals and gaskets. Aluminium bellhousing for Type 9 gearbox. Ford type 9 box with quick ratios. 4.1 differential with LSD. Suspension Avo shocks - Fronts rebuilt by AVO 2019 Nylon race bushes all round. Short steering arms - gives same rate as Westfield quick rack. Alignment setup and corner weighted by Troy at NMS - 545kg Lightweight aluminium hubs. Front and rear anti-roll bars. Wheels/Tyres Ultra-lightweight 13” Force racing 3-peice modular wheels - Perfect condition. Avon ZZS tyres - Hardly any wear Brakes 4-pot Bremsport callipers - (Refurbished with new pistons and seals 2021) Ferodo DS1.11 pads - 2021 Motul RBF660 Fluid - 2021 Brake lines replaced - 2015 Bodywork Carbon flared side panels Carbon aeroscreen Carbon dash Carbon effect nose cone, cycle wings Carbon bootlid Carbon wing mirrors Carbon kick strips Carbon chassis rail protectors Caged FIA spec roll cage Flat floor to engine bay Quick release rear diffuser Interior Race Technologies DASH2 - Installed at same time as new engine - clocks reset Tillet B6 carbon fibre seats - £1400 (Driver seat is adjustable on runners, passenger seat fixed) 6-point harnesses Momo quick-release steering wheel with Blinkstop wireless controls for indicators, horn and lights. Battery master cut-off switch Lightweight Odyssey P680 Battery Fire stick extinguisher CTEK battery charge indicator socket in dash Digital voltmeter with integrated USB ports More high resolution pictures available here: https://drive.google.com/drive/folders/1NKoZLSBMXHNp92dq7Ca4bs5Tm7s21jB5?usp=sharing Any questions please let me know. I am located in Reading, Berkshire.
-
Westfield 270HP Duratec Roadgoing Competition Car Package - SOLD
Simon_Jones posted a topic in Westfields for Sale
After nearly 6 years of ownership the time has come to sell my roadgoing Westfield sprint / hillclimb / track day car. This is an opportunity to buy a truly ready to go competitive car which has been run in roadgoing classes (Westfield Speed series W2 and BARC equivalent) but easily has the pace for W3+ on non-roadgoing tyres. In my novice hands it has delivered class wins at Shelsley Walsh, Gurston Down, Castle Combe and Abingdon CARnival and has rarely been out of the top 3. Despite 270 HP it is extremely well set up and predictable, even in the wet. A recent outing at Castle Combe with an instructor, more used to Caterhams, left him seriously impressed with how capable it was. The previous owner purchased the car new as a factory build Sport 2000 and carefully upgraded the car for competitions using the best available parts and suppliers. It certainly is not a show car, with the bodywork reflecting a competition focussed vehicle. However, it comes with the following brand new items for the new owner:- - New Westfield V8 Bonnet (red) - New Westfield nosecone (Black) - New Carbon NV super lightweight carbon wheel arch protectors - New Carbon NV carbon composite boot cover - 10 Litres of Millers Triple Ester competition oil and other spares. Also included is a spare set of 13” Compomotive CRX wheels (like new) and Avon ZZS tyres fitted in April this year, with less than 50 wet track day miles. The additional items would cost around £3k if purchased separately. Price £16.5K to include all above as an ‘on the button’ roadgoing competition car package / amazing track day car. Chassis: Standard Sport 2000 – Registered on age related plate in 2008. Mileage 11,200. MOT until 21.05.22 Steering by Westfield rack, competition mountings, short competition steering arms. Suspension is standard rear wishbones, factory ‘Gen 3’ wide track front. Dampers are Protec alloy spec'd and supplied by Procomp Motorsport. Factory rear anti-rollbar, Playskool front anti-rollbar. Suspension setup by Procomp Motorsport. Westfield alloy uprights, Westfield competition brakes, with 4 pot front callipers and front vented discs. 7” x 13” Prorace 1.2 black wheels on the front and 8” x 13” Compomotive CXR wheels, black, fitted with 215/55x13” Avon ZZS all round (MSA 1b). Body: Standard factory Sport 2000 Post Office red bodywork, with Aerodynamix carbon fibre aeroscreen, carbon effect rear light clusters and carbon effect lightweight dash. Dash 2 electronic display (factory fitted). Dash mounted FIA cutout switch. JK Composite seats; double skinned, and a special order low back seat for the passenger. lightweight wing mirrors. Small headlights. CSR style carbon fibre front wings. CarbonMods carbon fibre lightweight nosecone, fitted with canards. Playskool Motorsport lightweight full safety cage (fully approved for MSA use). Engine: This is essentially the original Ford Power products Duratec engine as fitted by Westfield new. However the engine has been much modified, and its present spec is as follows:- 2ltr. Duratec on standard crank, but carefully balanced, and SBD keyway mod. Lightweight flywheel, by Raceline. Titan drysump kit, Carillo steel conrods, Supertec forged pistons. ARP flywheel bolts, crank pulley bolts, main bearing cap bolts and big end bolts. Cylinder head gas flowed by Simon Armstrong of Ultimate Performance, and camshafts also by Ultimate Performance, fitted with vernier pulleys. visit www.ultimatep.com after which I think you'll agree there isn't anyone better qualified for the job. The engine still runs on the KMS tapered throttle bodies, as used at the time by Westfield, and the KMS ecu. The entire exhaust system was built by Matt Simpson, Simpson Race Exhausts, to dimensions supplied by Simon Armstrong. Typically noise tests at 97-99 db. Engine was initially rebuilt to something like the above spec by Northampton Motorsport in 2011, and re-mapped by Troy Robinson. It subsequently had a precautionary engine rebuild at Northampton (when the dry sump conversion was carried out) in March 2015. In April 2015, the car was checked (following the March re-build) on The NMS rolling road, and was found to be making (at the flywheel) 272 bhp at about 8,750 rpm, and 181 lbs/ft of torque at about 6,400 rpm. Of more practical relevance, the torque exceeds 150 lbs/ft from 4,500 rpm right through to the red line of 8,950; and the power exceeds 250 bhp from 7,400 rpm through to approx. 9,000 rpm. It has been completely reliable, just changed the oil filter and oil very regularly, and only used Millers fully synthetic triple ester competition oil. Transmission: Uprated competition paddle clutch. Gearbox is based on a Ford type 9 5 speed 'box, but everything was re- built in March 2019 using full alloy casings by Steve Perks (SPC transmissions). It is a Steve Perks own design of straight-cut close ratio gear set, on fully needle roller main shaft and synchromesh engagement. The prop shaft is an upgraded Bailey Morris item. The diff is a Ford Sierra based diff. However, it has been rebuilt by Bara Motorsport with 4.44 crown wheel and pinion set and at the same time a ZF plated LSD unit was fitted. The combination of high revving engine mated to this gearbox gives amazing speed ranges through the gears and is key to the car’s competitiveness. 60mph in 1st, 84 in 2nd, 105 in 3rd, etc. and it had been timed at the Aintree sprint at just under 140mph and still pulling. Fuel supply is via a pair of small sprint tank made by Alloy Racing Fabrications, with a separate swirlpot, and 2 fuel pumps, so no risk of fuel starvation unless you run out of fuel completely..thumb.JPG.a6c134d0fb99c8ebeda01ceed3e766a4.JPG)
.thumb.JPG.59e0730647d88e7bd96aab1b324c6041.JPG)
.thumb.JPG.f730993e6d6dd79402fd16e12a34f1e2.JPG)
-
------------------------------------------ NOW SOLD ------------------------------------------ Hi All, I hope you all doing well. Unfortunately, it is time to sell my loved Westfield due to house purchase and the need for some additional cash to maximise our deposit. The car is well know amongst Warwickshire members and have been in the regular club meetings at the Falcon and around the Curborough a few times. The car was purchased by me on 2018 and have done not many miles since. Current mileage is 14700miles. The car is fitted with a duratec engine was rebuilt at 11568 miles, producing 226bhp with red line at 8250rpm. Engine is fitted with forged pistons provided by supertech, K1 tech H beam con rod set. New flywheel, clutch cover and plate. Cylinder head ported, uprated cams, springs etc. Techcraft Exhaust. Webcom management system tuned by NMS. Raceline wet baffled sump. Engine has been service yearly with Millers oil, 5w40 NT+ specific for Duratec. Car is fitted polo rad with water wetter coolant fluid, Mocal oil cooler that together allows to keep the engine in the ideal working conditions in any driving conditions. Type 9 Heavy Duty and long first gearbox, was serviced and revised last year at the beginning of the lockdown by 3J driveline at Kenilworth. RedLine Lightweight Shockproof gear oil. Fitted with a Quaife LSD. Geometry set-up and corner weighted by Spires in Leamington by Matt, total mass of 596kg wet, mass distribution 48 / 52. The car comes with 2 used sets of 15's and a brand new set of 13's, all team dynamics with Toyos 888's and Nankangs on 2 of the 13's. Front suspension has been re-bushed with powerflex. Some spare parts are available, side deflectors, half doors made of carbon fiber, headlamps, washer fluid bottle, windscreen, wiper mech and few bits. Car is fitted with immobiliser Thatcham 1, that helps with peace of mind together with the detachable steering wheel. 🙂 MOT is due to 21/03/2022 There is a PRG Mini Sport trailer as well up for sale that I have used to tow the car to events. I am asking for £15500 for the car and £1500 for the trailer. Lots of memories and smiles, would be sad to let it go, but I am sure that might come back at some point to the Westy world. Car is located in Warwick. Please do not hesitate to ask any questions. Thanks a lot. Gab.
-
Similar to other baffle designs this will fit the sump of either the 1.6 or 1.8 MX5's to hopefully help retain the oil around the pick-up pipe. I designed this for a standard uncut sump and it fits below the standard baffles but it could also possibly be shortened for a cut-sump. I had two spares made in addition to one for my own car and this is the last spare. The Viton Rubber Flaps shown in some of the pictures are not included but these can be bought from ebay etc. Some minor fettling will be required to make this fit as the slots could benefit from being enlarged slightly to ease fitting the Viton flaps.
-
Hi, I have a leak on my hydraulic clutch and not sure what could be the source, I guess could be the nipple got loosen and then draining would be ok or worst case that the seals are gone and need replacement. My question is what is the best way to tackle it, as the bellhousing is hidden under the cowl?. I thought in propshaft out and the gearbox and get access keeping the engine in place or propshaft out and move the engine forwards and get access to the bellhousing from the engine bay? Please let me know your thoughts, I think that this is something that for sure somebody has gone through already. Thanks a lot. Kind regards.
-
I know these are hard to find, but I am sick of beating on a 1300cc sump to get it to fit!
-
Raceline Sump (SOLD Subject to full payment)
It Almost Looks Like A Car posted a topic in Parts for Sale
For Sale - Raceline Sump for 1.8 Silvertop/MT75 gearbox (or Balcktop with purchase of new baffle tray from Raceline) Good condition all round, no grounding scratches etc. I have given it a good clean, Sale includes both sump plugs, finger filter, pickup pipe, pick up o-ring and baffle plate. Further info and ftting instructions: http://www.raceline.co.uk/products/part_section.asp?SectionID=40&CategoryID=2 Only selling due to new engine having one already fitted. Pick up from near Tewkesbury, Gloucestershire or postage at cost. £270 ono Lots more pics available
-
Hi all, Selling my beloved high specification Duratec-engined Westfield as my wife is having a baby - full details and photos are as follows: https://www.pistonheads.com/classifieds/used-cars/westfield/other-models/westfield-duratec-203bhp-fw-2008/7447993 Many thanks, Rob
-
Hello all, I am gauging interest with the intent to sell my much loved Westfield Sport with the FW body kit. It’s a 57 plate factory built Westfield which pretty much every factory upgrade on it. My only reason for sale is I dont drive the car enough and my other car is a Golf R which is just quick and a bit more practical, but definitely not as much fun!! The car has an MOT valid until 20th September 2017, and two new tires were added on 15th Sept 2016 at the mileage of 7302. The current mileage of the car is 8100 miles. The engine is a 2.0 litre Ford Duratec has been upgraded and the final components are listed below. The work was carried out by AMS on 13th July 2016 and custom mapped by Track n Road on 28th November 2016 resulting in an impressive 220.3 BHP and 154.6 lb/ft (I have the print out of the dyno chart for proof) The engine now revs upto 8500rpm and the car tachometer has been changed to a 10k gauge. Additional VDO oil temperature gauge and voltmeter gauges have been added. Ultimate performance 200 camshafts Wossner 12.5:1 High Compression Forged Piston K1 Forged Conrods ARP Rod bolts KMS MP25 ECU KMS EUGO Controller KMS Inlet Manifold KMS Throttle bodies 4-2-1 Exhaust Additionally the engine has a Raceline low profile wet sump and a Raceline front engine cover in matt black I have added in a bigger radiator to help keep the engine cool on those summer days, its a full stainless steel 55mm core radiator by Coolmax. The drivetrain consists of the following components: 5 speed manual gearbox, I think its an MT75 (not 100% sure) Lightweight Billet flywheel ARP Flywheel bolts AP Racing clutch The other factory upgrades include: Limited Slip Differential Front anti roll bar and the wide track wishbones. Rear anti roll bar Heater kit Contoured dash ProRace 1.2 wheels with 205/50 R15 tyres. Front brakes to 4 pot calipers Heated front screen Leather touring seats The car also has the factory wet weather gear which includes the doors and roof, additionally I have the Perspex side windshields which are great. Also there is a tonneau which has a zip down the middle, and finally I purchased an outdoor full car cover which is a StormForce plus with extra security and fixing straps at a cost of £230.. In the spirit of honesty and to save you time or uncertainty there are a couple of things that need doing on the car that I haven’t got around to do and don’t plan to do before selling, this has been reflected in the price. The tracking needs doing (Typically costs £50-80) There is a small crack in the windscreen, however it has passed 2 MOTs like it so not a problem but wanted to call it out. Based on the spec of the car, the upgrades and the performance, I'm taking into consideration the above I'm looking for £17,000, the car will be available from July but this is open to negotiation.
.thumb.jpg.53bf68c1303c9684ae5f2a25d06d6fef.jpg)
.thumb.jpg.069fa4581f68a9814cfc5e60a97ffdf3.jpg)
.thumb.jpg.ad333802f9155b08510c5034407ca35b.jpg)
.thumb.jpg.f17983266db3f9ee9cc75189f7b645c8.jpg)
.thumb.JPG.d44f7c094fadc967959790e0d530abb4.JPG)
.thumb.JPG.0b1ad79599c1974322444b520901b966.JPG)
.thumb.JPG.1c2ade18091bbd12936137f21f9b685f.JPG)
.thumb.JPG.14b596b05cfc462c569d023899ca1ed9.JPG)
.thumb.JPG.76b734ac20ff57701bb793a58149fdb5.JPG)
-
Raceline wet sump for a 2000cc duratec engine Incredibly rare to find used. Taken from a speed series car being upgraded to dry sump. Photos show cleanliness of sump after oil drained only no internal cleaning done. Includes dip stick kit New cost £504 inc VAT £350.00 + postage although collection preferred Can be taken to stonleigh sun or mon or delivery can be arranged along M1 M25 corridor from Northampton to Swanley
-
Selling my alpha webcon throttle bodies off my 2006 2.0 Duratec good condition! Car was set up by Troy at NMS with these on last year 181 hp from standard engine. Includes titan inlet mani pico injectors 260cc filter and back plate linkage and throttle cable brand new TPS ready to bolt on and go £1200 new from burton .. £600 plus delivery
-
For sale are a series of Blacktop 2.0 Zetec used parts in good condition. My original plan was to recondition and tune the engine, but instead I bought a complete, new unit, so all these parts are now surplus to requirements. (Prices in Brackets are the current new prices at Burton Motorsport) Blacktop Raceline Sump - Exhaust side starter motor £250 (£532) Sold to CRAIG R Blacktop Raceline Water rail - including fitting kit and thermostat & housing - £150 (£285) Sold to Kernow Still for Sale Starter Motor -Exhaust side £50 (£156) Flywheel & Clutch assembly £50 ( ) Blacktop Rocker cover £20 Ignition Coil Pack and leads £30 (£80) Cylinder head & Std Cams £100 (£160 surcharge for cylinder exchange, Cams ??) Block, rods, pistons & crank - make an offer Currently all the remaining bits are bolted together, but I am not selling it as a 'runner' - just as spares or for reconditioning. If you want all the rest of it, it's yours for £200 - collection only from Norfolk please. (Happy to post bits) Any questions please PM me. Thanks Jason
-
Hello All, I'm David, I live in Belgium and since last week I have a Westfield with a 2.0 Ford Duratec engine and KMS ecu. The car was factory assembled in 2009 and I'm the 2nd owner. The previous owner turned 75 and it became too difficult for him to get in/out of the car. So he decided to sell it. He now has a Morgan Aero. I think that's an acceptable replacement The previous owner barely drove it, at the moment the car has 14300km (8886 miles) and always stored it inside. So I can say it's a barely new car. But at the moment I'm not happy about the Duratec engine: It seems that the car runs much too rich. I have exactly the same as these guys had, It seems that a few (or most?) Duratecs from around 2009-2011 left the factory without a decent map: (I'll open a separate topic about that shortly) http://forum.wscc.co.uk/forum/index.php/topic/86191-anyone-with-kms-duratec/ http://forum.wscc.co.uk/forum/index.php/topic/75321-duratec-owners/ I added some pictures but I don't like them very much because it was rainy. Will post more and better pictures on a sunny day... hopefully soon. And hopefully soon also happy about the Duratec
-
So as you can tell from the title, yesterday did not end well... I've had my SEight for 6 months now and in that time have uprated the cooling system, sorted the brakes, fitted new wheels and have done a basic service - oil, filters etc. Not done anything on the engine apart from that. However while cruising home after a great day at Bedford Autodrome, the old V8 punched a hole in the side of the block, spitting lumps of metal on to the road. Presumably some sort of con rod failure - the RAC man suggested possible blocked or oil starved con rod bearing. - Is it worthwhile or even possible to repair the damaged block and rebuild the bottom end? - If not, is it worth sourcing a new block and rebuilding the engine using my existing parts? - Are the cylinder heads in my car completely standard, or uprated in the Westfield builds? How can I tell? - Could I find a fully build engine and fit the cylinder heads etc from my existing engine? - Where's the best place to find spares / whole engines? I do love the drama and performance of the V8 but more modern engines could 'add lightness' whilst providing a similar power output. As another option, how complicated would it be to replace it with a 2.0L Duratec for example, but keep the existing LT77 5-speed gearbox? Anyway, I don't have the work space or time for a long term perfect rebuild project, I would just like to get it back on the road as soon as possible, hence coming here for some advice! This is my first kit car so go easy on me, I have much to learn and any help would be greatly appreciated. Cheers, Oscar
-
Westfield special offers Febuary 2014
Westfield Chesil Limited posted a topic in Westfield Chesil Ltd.
Hi all, Before I start listing parts, FREE MUG WITH EVERY SPECIAL OFFER PURCHASE!! We have recently recieved a new batch of Mazda SDV 4 into 1 manifolds into stock, due to the popluar demand for this item, I have matched the special offer price from last year!! 1600 http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=173&search=mazda 1800 http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=174&search=mazda Wind deflectors back on offer 5 pairs availiable at this special price http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=684&search=wind+d Zetec throttle body upgrades for omex ecu kit. http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=751&search=throttle I have found another 2 sets of the popular 195 50 15 R1R TYRES hiding at the back of the tyres stocks, so they are back on offer! http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=755&search=r1r Sport Turbo seats, black with black piping, in stock and ready for immediete dispatch. Other piping options available, but have a 4 week lead time http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/search&search=sport%20turbo%20seat Half hoods for cars with RAC bars http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=50&search=half+hood Half hood for cars with the Westfield MSA approved half cage http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=767&search=half+hood Megabusa exhaust manifold, one only at this price http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=387&search=megabusa+manifold Duratec manifold one only at this price. http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=766&search=duratec&page=2 Any specific parts or deals you would like to see on special offer?? Let me know by PM and i will see what i can do. Regards Russ -
Widebodied Westfield Sport 2000 Duratec. Built by me in 2006 as a modular build using all new parts supplied by the Westfield factory. In 2010 I had the standard Webber ECU removed and a better re-mapable Omex 600 installed along with a custom re-packable Techcraft exhaust, oil catch tank and a softbitsforsevens half hood. Having I built it all the servicing, MOT’s and upgrades have been handled by the well respected Interpro race and rally prep in Bristol. (A huge file of receipts is available for anyone interested in looking through.) For the last 18 months I’ve just been too busy to really use the car as it deserves and last year covered just 900 miles in it. Sadly, I think it’s time I parted company with it. Currently at 10300 miles, 11 months MOT remaining and 6 months tax. SOLD Full Spec as follows:- Engine & Power: Westfield / Ford 2.0 - I4 DOHC, 16v, Duratec (201bhp with print out), with lightened flywheel, AP racing clutch, Raceline shallow baffled sump, Raceline side mounted oil filter (all factory standard), Jenvey throttle bodies, bespoke aluminium oil catch tank with gauge. Transmission: Mitchell Cotts MT75 - 5-speed gearbox (all syncromesh) with quick shift stick, connected to Ford 3.9:1 limited slip differential. (all factory standard) Engine / Ignition Management: Omex 600 ECU, with pipercross air filter. Techcraft Megaflow custom repackable exhaust. (also included a second “MOT/road” exhaust) Suspension & Wheels: All round fully independent double wishbones - Front anti roll bar, anti roll bar fitted to rear, all wishbones fitted with nylon bushes for improved handling. Wheels – ATS lightweight 15” alloys with Toyo R888 tyres Brake System: AP Racing master cylinder, front - AP Racing calipers with solid discs, rear - VW golf callipers with solid discs. Bodywork and Lights: Main body in chrome yellow, with yellow rear wheel arches (detachable) and yellow standard nose cone. Front cycle wings in chrome yellow. RAC roll bar with modified boot box. Interior and Dashboard: Interior and carpet colour - Black Seats - Black with yellow pipe trim with Westfield 4-point racing harness. Dash – Standard black dashboard with VDO gauges Heater / demister option fitted. Racetech quick release steering boss and MOMO professional race steering wheel. Wet Weather Equipment & cover: Standard factory issue side screens, with full tonneau cover - All in black. SoftbitsforSevens bespoke half hood with storage cover Bad points: I'd rather be upfront about any minor niggles than try and hide them so I've posted them here Crazing in gel coat layer around one of the retainer bolts on front left cycle wing and also adjacent to left rear wheel arch.
-
2005 Westfield Sport 2000 Duratec C/W Brian James Minno Max Trailer
Paul B posted a topic in Westfields for Sale
Blue with chrome fittings. Everything you need for road/touring and track days. Garaged on trailer. Excellent Condition. Built by myself from Westfield Modular Kit. • 12 Months MOT • AP Racing Brakes • Limited Slip Diff. • Anti-Roll Bars Front and Back • RAC Roll Bar • Boot Box Lid • Team Dynamics Pro Race 1.2 Wheels (5 off) C/W Toyo R888 Tyres • 6” Sports Silencer • 4 point harnesses • Full weather gear. • Catch Tank with Level • Tonneau cover • Wind deflectors • Immobiliser • Suspension setup and mapping by Northampton Motorsport. • Hood Bag • Boot Top Bag • Second set of alloy wheels (5 off) with wet weather tyres. • 5 1/2” silencer with CAT (MOT) • Silencer wadding x 2 • CTEK Battery charger / conditioner. • Brian James Minno Max Trailer (2008) – as new (the galvanise is still shiny!) • Locking fuel storage box c/w 3 x 20 litre jerry cans • Hitch lock • wheel rack • wheel clamp • Garaged at all times. Call me on 07021558696 SOLD.
.JPG.1f29066cb6ef7d022bc5ac594175111d.JPG)
.JPG.bdb2ac4d5f4399dcc871f21ef6c444f4.JPG)
.JPG.70bcbaa65ee72f928a1d275869d2d9c0.JPG)
.jpg.632e680cef6d0708a16b18ce49ed820e.jpg)
.jpg.9c981657dfbf4d643e3659dd6be439f9.jpg)
.jpg.1cab2b547c19b7d833f8c444e09cf898.jpg)
.jpg.8befc27eea3898c1f57249dceddcd2f9.jpg)
.JPG.ed4f251632e04198b393a68acb827e1f.JPG)
.JPG.dc382860ffc0e45fc128180ea0ef35e7.JPG)
.JPG.4581e253774aad288141517744018b34.JPG)
.JPG.40d7a8c038f04c58fd2b813b7e923d41.JPG)
.JPG.9339bd9d1a7d79e8e8d4a18dc06194b0.JPG)
