adhawkins Posted August 5, 2003 Share Posted August 5, 2003 You won't need a beacon for 0-60. Just for lap times. Andy Quote Link to comment Share on other sites More sharing options...
Bananaman Posted August 5, 2003 Author Share Posted August 5, 2003 You won't need a beacon for 0-60. Just for lap times. How do you measure the 0-60 then? Quote Link to comment Share on other sites More sharing options...
Mike dB Posted August 5, 2003 Share Posted August 5, 2003 How do you measure the 0-60 then? A long tape measure? Quote Link to comment Share on other sites More sharing options...
Blatman Posted August 5, 2003 Share Posted August 5, 2003 It'll be a function embedded in the Stack. My SPA speedo has it too. You *just* set it to time a 0-60 run.....but as has been mentioned, if the speedo picks up on a driven wheel/driveshaft, you won't get an accurate time. If you had a beacon, you can do a 0-60 time, but you'd have to drive in a circle............. Quote Link to comment Share on other sites More sharing options...
Westfieldman Posted August 5, 2003 Share Posted August 5, 2003 If the unit data logs [but does not time 0-60 times like my stack] Does it not work if you pass the beacon very slowly then stop the data logging is running timming the stopped bit and looking for the wheel speed [from the front wheel is best] then after a few runs down load the data and then view the results and plot the time agaisnt the speed. Have only seen Peter C's logs for Cadwell close up but it would be close if it works like that you are only using the beacon to start the lap/run Paul. Quote Link to comment Share on other sites More sharing options...
hilux Posted August 5, 2003 Share Posted August 5, 2003 I know it will do lap times with a beacon. If you have an average speed function and know the exact length of the circuit you therefore have a lap time Quote Link to comment Share on other sites More sharing options...
ACW Posted August 5, 2003 Share Posted August 5, 2003 Contact Stack for a S/W Updgrade (Chargeable...) Quote Link to comment Share on other sites More sharing options...
Bananaman Posted August 5, 2003 Author Share Posted August 5, 2003 Whats S/W Quote Link to comment Share on other sites More sharing options...
gregh Posted August 5, 2003 Share Posted August 5, 2003 s/w = software Quote Link to comment Share on other sites More sharing options...
Westfieldman Posted August 5, 2003 Share Posted August 5, 2003 Mark Owen Motorsport Sales Engineer Stack limited Wedgwood Road Bicester,Oxfordshire, OX26 4UL Tel 01869 240404 Fax 01869 245500 www.stackltd.com mark.owen@stackltd.com But all said and done 0-60 times are only K2RUM baiting and pub talk lap times are the true test when you have gone under 1:300 for Cadwell you are good. Paul. Quote Link to comment Share on other sites More sharing options...
Bananaman Posted August 5, 2003 Author Share Posted August 5, 2003 But all said and done 0-60 times are only K2RUM baiting and pub talk Nowt wrong with that. lap times are the true test when you have gone under 1:30.00 for Cadwell you are good. Naughty Boy. What time do you recon that you can do Paul. Andy Quote Link to comment Share on other sites More sharing options...
Westfieldman Posted August 5, 2003 Share Posted August 5, 2003 1:45 so far Paul. Quote Link to comment Share on other sites More sharing options...
Jan Coombes Posted August 7, 2003 Share Posted August 7, 2003 You have the same stack unit as mine, well good as. So you do not have a 0-60 tester. We have a AP22, that you can borrow (depending where you live and as long as you look after it) This just sit on the car some where, set it do as may 0-60 runs as you like then down load it to a PC have a look Here, we have been testing all sorts of cars. Quote Link to comment Share on other sites More sharing options...
ACW Posted August 7, 2003 Share Posted August 7, 2003 Gimme a lend mister.... I reckon I can beat the SLR especially on slicks.... Quote Link to comment Share on other sites More sharing options...
Bananaman Posted August 8, 2003 Author Share Posted August 8, 2003 Adrian would you get there in 1st, looks like SLR changed up at about 50mph? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.