Mark (smokey mow) Posted August 26, 2012 Share Posted August 26, 2012 is the spiggot bearing just in the flywheel on a mazda normally they sit in the end of the crank Yes Pete, it's in the flywheel on Mazda's Edit: doh must type faster Quote Link to comment Share on other sites More sharing options...
darve Posted August 26, 2012 Author Share Posted August 26, 2012 just about visible bp220516 easier to read in the flesh does this bed to be easily read for iva/registration? Quote Link to comment Share on other sites More sharing options...
Mark (smokey mow) Posted August 26, 2012 Share Posted August 26, 2012 Yes, the DVLA will need to be able to read it. I assume you're going for a Cat emissions test with VOSA so they wont need to see it. Quote Link to comment Share on other sites More sharing options...
Dommo Posted August 26, 2012 Share Posted August 26, 2012 VOSA checked mine too. I didn't paint over the engine number but still had to get the wet and dry out to make it legible. Box and engine look really smart. Makes me wish I'd painted my gearbox! Quote Link to comment Share on other sites More sharing options...
Mooch Posted August 27, 2012 Share Posted August 27, 2012 errm the engine and gearbox are grey My wife tells me there are 50 Shades of grey..... Quote Link to comment Share on other sites More sharing options...
darve Posted August 27, 2012 Author Share Posted August 27, 2012 My wife tells me there are 50 Shades of grey..... oh noooo Quote Link to comment Share on other sites More sharing options...
Captain Colonial Posted August 27, 2012 Share Posted August 27, 2012 My wife tells me there are 50 Shades of grey..... Has she been looking at the Dulux colour charts again? Quote Link to comment Share on other sites More sharing options...
darve Posted August 27, 2012 Author Share Posted August 27, 2012 here's the engine ready to be installed. I'm off work tomorrow so that's what's on the agenda can anyone confirm if the bracket on the back of the starter motor out of the Mazda is required? it's miles off from the hole in the engine mount thanks Quote Link to comment Share on other sites More sharing options...
KugaWestie Posted August 27, 2012 Share Posted August 27, 2012 What did you use to paint/spray the box and engine Dave? Looks very nice Quote Link to comment Share on other sites More sharing options...
darve Posted August 27, 2012 Author Share Posted August 27, 2012 <p> What did you use to paint/spray the box and engine Dave? Looks very nice this stuff off Ebay Quote Link to comment Share on other sites More sharing options...
pete g Posted August 27, 2012 Share Posted August 27, 2012 looking good mate 1 Quote Link to comment Share on other sites More sharing options...
Mark (smokey mow) Posted August 27, 2012 Share Posted August 27, 2012 You can take off the starter bracket mate, its not used on the Westfield which is why it doesnt fit Quote Link to comment Share on other sites More sharing options...
darve Posted August 27, 2012 Author Share Posted August 27, 2012 looking good mate cheers mate few minor issues along the way................namely a few bolts sheering off over the last couple of day in very difficult to get to locations Quote Link to comment Share on other sites More sharing options...
KugaWestie Posted August 27, 2012 Share Posted August 27, 2012 <p> this stuff off Ebay Thanks - any priming or just spray it on? Quote Link to comment Share on other sites More sharing options...
darve Posted August 27, 2012 Author Share Posted August 27, 2012 You can take off the starter bracket mate, its not used on the Westfield which is why it doesnt fit your telling me I clean it up and painted it for no reason what's the fourth whole in the engine mount for (top left)? or is it the same bracket for other kits too? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.