Jump to content
Store Testing In Progress ×

Donor done, build started


Dommo

Recommended Posts

Never doubted it! Congratulations on passing!

  • Like 1
Link to comment
Share on other sites

And you haven't missed summer yet, because there hasn't been one yet :laugh:

Well done....you can start unbolting stuff and replaceing stuff and adding stuff now.

Link to comment
Share on other sites

I'm starting that at the VOSA centre. Still waiting for the RAC guy to turn up with my new super expensive coil pack. We've added an extra engine earth though so hopefully shouldn't do it again

Link to comment
Share on other sites

Yes, much more fun doing it in a controlled and planned way though :laugh:

Link to comment
Share on other sites

Well done Dom, you got there in the end :t-up:

Link to comment
Share on other sites

So does this mean you can come out to play tomorrow then.....?? or have you got to do all the DVLA sh1te now

Link to comment
Share on other sites

Yeah I've filled in my V55/4, which should no doubt be a V55/5 but the guidance notes suggest that's for Q plates. Either way, trip to the DVLA not-so-local office tomorrow morning to kick the process off.

Annoyingly, I now have no further opportunities to drive it without a registration plate. Rubbish!

Link to comment
Share on other sites

Yeah, £300. Doh! Plus £20 for a litre of oil as it was looking a little low. I think the coils (always the passenger side one) were going because there was no earth strap for the engine. Lack of earth strap probably also explained the sometimes erratic cranking speed (it would occasionally stop for no reason then fire up). We fitted one direct to the battery. I'll probably also fit one to the starter motor as well for good measure.

We couldn't suss out where the engine was earthing to originally! Throttle cable? Diff? Either way, silly thing to overlook!

Link to comment
Share on other sites

I earthed mine from the dipstick bracket onto the earth stud on the chassis with a mini earth strap

I think there is a photo on my build thread

Link to comment
Share on other sites

A silly oversight! I've gone from the bracket by the CAS to the battery for now. Will swap that to the earth stud later just to make it tidier really.

Oh, speedo still doesn't work :d Hoping it's because I've not given the mk2 odometer the 'key' feed from the warning loom mk2s have

Link to comment
Share on other sites

Well done Dommo, thats the hard bit done. Word of advice when you go to the DVLA office to process the paperwork, ask to speak to a clerk who is experienced in the kit car registration process and it should all be very quick & painless (plates issued same day is possible) with no requirement for an inspection by them.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.