Search the Community
Showing results for tags 'bodyshell'.
-
Scuttle panel in orange
-
Again request for advice on the riveting of the shell to the chassis, as this is approaching fast. I've been through the FW manual again and can't remember much about how the shell and inside panels are to be fitted. Have some smaller black headed rivets in my supplied kit, but no real guidance on number of holes, pitch between or how many. I assume these are just for the 2 inside panels that go on the outside of the cabin, and then the rest of the shell attachment is just be normal 4mm plain rivets. Does the shell need any bonding like silicone or anything? Also any tips on
-
Ok, so moving forward with my body shell, and have the rear tub slotted into place, as I figured it was a good idea to get an idea of how things fit together etc. Found I had to bend the standard rear spare wheel carrier brackets out of the way with a big screwdriver and a hammer, may take advice I have had to cut them off later,as this is just a dry fit. Thanks I then pulled out the RH side as I want to get the position of the scuttle sorted out, and this seemed the easiest way as from what I can see the rear tub is the datum on the back panel on the rear o
- 8 replies
-
- shell fitting
- body
- (and 4 more)
-
Just been working on my scuttle, and can see some cutting in my very near future, and I've never cut this sort of stuff before, so looking for advice on best way and required tool's etc? Already have flat-nose drills so that part is covered its the cut outs I'm worried about. Was wondering is a 1/4 power file would be a good idea as long as you file away from the gel coat.