Jump to content

FRIDAY 9th July 2021 WSCC Blyton Trackday


Terry Everall

Recommended Posts

any main stealers near you. i was looking for a zetec 1.8 part recently and they still had some in stock at my local ford. what ecu are you running. @Jack T

Link to comment
Share on other sites

can the blacktop housing be drilled and tapped for the 1.8 sensor. im still at work if we know the thread i could bring a drill and tap with me

  • Like 1
Link to comment
Share on other sites

@BenD thanks, tried local dealer, factors scrap yards with no joy unfortunately. 
 

MBE ecu, just wondering if I could plumb the sensor in via a bit of hose to the spare outlet and use one of the blacktop ones @marcusb or @Kingsterhas very kindly offered. 

Link to comment
Share on other sites

@BenD it a larger diameter one similar to a rad switch/sensor. 
 

Really appreciate your offer of help. 👍

 

@Kingster is very kindly meeting me with a black top housing which hopefully I can make work.

 

I was supposed to be trailering it tonight but no winch available so will just drive in the morning if I can get it together, fingers crossed! 
 

Just shows the power of WSCC!

Link to comment
Share on other sites

If you do go down the route of putting it in a hose on the spare outlet. If you need a bung making or something to push into the hose and you know the thread I may be able to make you a fitting to make it work. I'm here till half 5

Link to comment
Share on other sites

If you run a heater, disconnect the heater and put the sensor in the end of a short piece of rubber hose that would normally go to the heater and block the other pipe off with a bolt or similar and jubilee clip

  • Like 1
Link to comment
Share on other sites

@John funny that thought was just going round my mind, might be able to connect the gauge sensor to the other leg so I can keep an eye on temps still too. 

 

Link to comment
Share on other sites

35 minutes ago, JamesGN said:

Probably a daft question but I'm assuming it's no shorts or t shirts. 


Long trousers and sleeves. 

  • Like 1
Link to comment
Share on other sites

I really enjoyed today thanks. Good to meet people, see and get out on the track with other Westfields.

Thanks for organising.

Cheers

Dan

Link to comment
Share on other sites

Big thank you to the Organisers of the track day, had a cracker of a day !!

thank you all

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.