" I HAVE RECENTLY BEEN....."For members who just want to share what they have been doing

[Blatman]

Fixing the clutch on the green one...

 

 

[Richard (OldStager)]

other than gardening, i replaced the

i cant reverse protection on my chimney breast, i had previously put some on here when i got the car back in 08, but it rotted away. its a tight fit with the car despite it being a narrow...

 

side gate needs a repaint i noticed, yet more stuff for this summer.

 

[Kingster]

...fitting aerocatches just for @maurici

 

[Steve (sdh2903)]

Taking the thing apart again 

 

[Andy Malone - Editor]

Driving around Oulton Park..

 

[Paul Aspden (MoFast)]

designing decking stairs for the mother in law..

[TAFKARM]

She’ll fall straight through them - is that the plan?

[Paul Aspden (MoFast)]

@Rush Motorsport I would love to be like Les Dawson on the old Mother in law stuff. But in reality she's a good un.

[Blatman]

Doesn't hurt to top up the insurance though...  

[Andy - a15cro]

Tonight I have, prototyped a timing strut, stuck some stickers on, and turned a spark plug into a temporary catch can barb!

[Paul Aspden (MoFast)]

@Dave Eastwood (Gadgetman) - Club Secretary can we have a club yearly award for the most creative hack job. The above from @a15cro is a contender.

 

Other awards could be: 

 

Most expensive mistake of year.

Biggest her in doors pay off.

Parts scavenger of the year.

Most triggered on forum.

Best hack job of the year.

Funniest story out and about.

Shortest shorts on club blat.

Most unevidenced bhp figure.

Most useless modification.

 

 

 

[Paul Aspden (MoFast)]

@Dave Eastwood (Gadgetman) - Club Secretary I have some nominations to make already 

[Andy - a15cro]

@Paul Aspden The 2nd just the nomination makes me feel like a winner 👍 😁

[Paul Aspden (MoFast)]

@a15cro the thing that made me chuckle was the fact I had driven to two hydraulic hose companies today to get some M14 to 8mm barb fittings. Then you rock up with a gouged out spark plug. 

[Andy - a15cro]

1 minute ago, Paul Aspden The 2nd said:

@a15cro the thing that made me chuckle was the fact I had driven to two hydraulic hose companies today to get some M14 to 8mm barb fittings. Then you rock up with a gouged out spark plug. 

I’ve had two failed attempts at buying one to fit, number three is in the postal system and I’m still not sure it’s going to work, I’d actually washed my hands and decided to lock up but had to nip back in the workshop, my eye caught the plug sitting there and by some weird chance I tried it for size and it fit, so I put the gym on hold and fired up the lathe! 😉 Basically a pure fluke.