Kit Car Electronics Posted March 12, 2017 Posted March 12, 2017 Here is the thread for anyone that missed it - we're doing OK towards preparing for Stoneleigh, but need help with some specific parts please that must be gathering dust somewhere: Duratec crank sensor and connector Duratec crank sensor plastic alignment tool ECU coolant temp sensor ECU air temp sensor @Nic (NICO) - Shropshire and Mid-Wales AO CVH crank pulley (for trigger wheel attachment) @syman84 Ford 4 tower ignition coil Gen2 @Chris King - Webmaster and Joint North East AO and bracket any trigger wheel brackets/ unused kit Spark plug leads suitable for 4 tower coil to CVH plugs (Ford Ka) 2
Kingster Posted March 12, 2017 Posted March 12, 2017 I have a Ford coilpack and leads off a Zetec. Any good?
Kit Car Electronics Posted March 12, 2017 Author Posted March 12, 2017 3 hours ago, Chris King - Webmaster and Joint North East AO said: I have a Ford coilpack and leads off a Zetec. Any good? Yes please to the coilpack, Chris. 1st or 2nd gen? Can you send a photo please so we can get Ka plug leads to suit?
Kit Car Electronics Posted March 12, 2017 Author Posted March 12, 2017 brilliant, thanks Chris - that'll be perfect for Scott. Please can you also just measure the diameter of a coil posts with a lead pulled off? Something rough like 15 or 18mm I think - then we can get Ford Ka leads to suit.
Kingster Posted March 12, 2017 Posted March 12, 2017 Yes will do. Just got in from the man cave and missed this so will do it next time.
Hornet600 Posted March 14, 2017 Posted March 14, 2017 I bought a duratec crank sensor direct from local Ford garage and the alignment tool comes as a kit. Cost £30 and came day after purchasing. 1
Simon Waterfall Syman84 Posted March 14, 2017 Posted March 14, 2017 I have a cvh crank pulley with the rest of an engine attached to it will pull off next time I'm at the garage. 2
BenD Posted March 14, 2017 Posted March 14, 2017 sorry mike i keep forgetting to measure that trigger wheel. ill definetly do it tonight 1
Nic Chase (NICO) - Shropshire & Mid-Wales AO Posted March 14, 2017 Posted March 14, 2017 Hi Mike I have an ECU air temp sensor off my Duratec if it's any good to you. 2
Kit Car Electronics Posted March 14, 2017 Author Posted March 14, 2017 Yes, please Nic! If @Scott Young - WSCC Chairman could send you some postage, please could you send to Luke @Plays-Kool for loom matching? Can you shove a photo on here too, please? Cheers
Kit Car Electronics Posted March 14, 2017 Author Posted March 14, 2017 12 hours ago, syman84 said: I have a cvh crank pulley with the rest of an engine attached to it will pull off next time I'm at the garage. Yes please!! Assuming it is the same as this, if @Scott Young - WSCC Chairman sends postage, could you send to @bunje? Then, Ben can attach a trigger wheel (either his own, or a new one we'll get) and send on to Scott, who can make a cardboard sensor template to send back to Ben, to turn into steel, to... You get the idea We can return Scott's old pulley to you in exchange...
Nic Chase (NICO) - Shropshire & Mid-Wales AO Posted March 14, 2017 Posted March 14, 2017 Photo as requested. Is this any good?
Recommended Posts