Jump to content
  • Malvern, Help Registration Closed
  • Malvern, Help Registration Closed
  • Malvern, Help Registration Closed

Another S2000 IVA'd!


Dave Eastwood (Gadgetman) - Club Chairman

Recommended Posts

Well that would be a pass then, though I'm sure the tester was desperate to pick on something during the re-test!

 

Still, here we go:

 

IMG_2924.JPG

 

And the the vital piece of paper, at last:

 

IMG_2923.JPG

 

Just leaves the the battle with the DVSA now.  :down: 

  • Like 8
Link to comment
Share on other sites

:yes:  :yes:  :yes:  :yes:  :yes:  :yes:  :yes:

Link to comment
Share on other sites

well done

 

It might yet be driven to Stoneleigh ... fingers crossed

Link to comment
Share on other sites

Well done Dave

 

Have I missed something here - you said Retest? What happened on original test then?

Link to comment
Share on other sites

Superb, well done!

Link to comment
Share on other sites

Well done Dave

 

Have I missed something here - you said Retest? What happened on original test then?

 

I won't repeat the full details, they're in a different thread, but basically it failed on the speedo calibration. The Stack speedo uses an odd system to calibrate itself, that isn't adjustable/tweakable and doesn't (being American made, I guess) allow the margin of error that we have in the UK.

 

Essentially, first time round, it was reading only slightly over true road speed at 30/40 mph, till by the time you got to an indicated 70, you were actually doing a measured 70, and above this, the speedo said you were doing lower speeds than you actually were.

 

Because the speedo can only be calibrated by driving a fixed (two mile) distance in set up mode, I couldn't fix it there and then in the lane.

 

I shortened my calibration "course" to about 1.8 miles, which made the speedo indicate 70 mph for a true road speed of 65 mph (GPS measured) and on the re-test, this was sufficient "margin".

  • Like 1
Link to comment
Share on other sites

I won't repeat the full details, they're in a different thread, but basically it failed on the speedo calibration. The Stack speedo uses an odd system to calibrate itself, that isn't adjustable/tweakable and doesn't (being American made, I guess) allow the margin of error that we have in the UK.

 

Essentially, first time round, it was reading only slightly over true road speed at 30/40 mph, till by the time you got to an indicated 70, you were actually doing a measured 70, and above this, the speedo said you were doing lower speeds than you actually were.

 

Because the speedo can only be calibrated by driving a fixed (two mile) distance in set up mode, I couldn't fix it there and then in the lane.

 

I shortened my calibration "course" to about 1.8 miles, which made the speedo indicate 70 mph for a true road speed of 65 mph (GPS measured) and on the re-test, this was sufficient "margin".

 

I had missed all that!

 

All water under the bridge now though  :d

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.