Darve's Build Diary

[Mark (smokey mow)]

Don't worry about that, you wont be Able to adjust the handbrake either until you've properly bled everything.

[darve]

was going for the engine install this weekend, but mx5 parts don't have a couple of bits in stock

so I ring up the local Mazda, and they don't have any of the bits I want in stock

will have to get them ordered in...........fingers crossed they'll come in by Friday

[Mark (smokey mow)]

What you after Dave? i may have what you need on the shelf depending on what it is.

[darve]

crankshaft rear oil seal

exhaust manifold gasket

half moon oil pan gasket rear

clutch disc

[Dommo]

Same here, I've amassed plenty of spares. Including coils haha

[SootySport]

I'm sure Marks MX parts dept. can help you out.

[Mark (smokey mow)]

I know I wont have a clutch (unless you want a 1600) but I'll have a look later and see if I've got any of the other bits.

[pete g]

have you tried ebay

[darve]

have you tried ebay

for done reason I never thought of that off to the computer in a bit

[darve]

I know I wont have a clutch (unless you want a 1600) but I'll have a look later and see if I've got any of the other bits.

cheers mate. I may drop the old clutch in for now until I upgrade the engine as it has plenty of neat left on it !

[darve]

one sump chopped down. off to the fabricators tomorrow

[pete g]

dont forget the drain plug

[Mark (smokey mow)]

No joy, sorry but the shelf is bare. Both Autolink and moss look to be showing stock for all the parts though.

[darve]

dont forget the drain plug

already told him about that will remind him in the morning

[darve]

No joy, sorry but the shelf is bare. Both Autolink and moss look to be showing stock for all the parts though.

No probs

Just ordered them from autolink