Kingster Posted August 16, 2020 Posted August 16, 2020 47 minutes ago, corsechris said: I'm going to guess.....the arrival of a shiny coat of paint. 👍 More than one coat I’d say 😁
Dave Eastwood (Gadgetman) - Club Chairman Posted August 16, 2020 Posted August 16, 2020 Oooh! be fantastic to finally see it in paint!
KugaWestie Posted August 16, 2020 Author Posted August 16, 2020 1 hour ago, corsechris said: I'm going to guess.....the arrival of a shiny coat of paint. 👍 Sort of. It should be off to @Marto303 for some fine tuning of my prep work followed by a 2k primer coat. Then it will come back to me for flatting back
KugaWestie Posted August 17, 2020 Author Posted August 17, 2020 Well the car has made it to its new home for a while
KugaWestie Posted August 17, 2020 Author Posted August 17, 2020 So with the car out of the way it’s time to sort out the garage floor with some decent workshop rubber tiles
Tim Reid Posted August 18, 2020 Posted August 18, 2020 10 hours ago, KugaWestie said: So with the car out of the way it’s time to sort out the garage floor with some decent workshop rubber tiles Which ones did you get? I've had some Duramat on backorder for a month so patiently waiting.
KugaWestie Posted August 18, 2020 Author Posted August 18, 2020 1 minute ago, Tim (TimDave25) - Joint Thames Valley AO said: Which ones did you get? I've had some Duramat on backorder for a month so patiently waiting. No idea what manufacturer they are from. I managed to get my hands on a load of second hand ones that came off a job we were doing. They are very good though, will take a trolley jack no problem and lock together very well, its hard to see the join on them
Tim Reid Posted August 18, 2020 Posted August 18, 2020 7 minutes ago, KugaWestie said: No idea what manufacturer they are from. I managed to get my hands on a load of second hand ones that came off a job we were doing. They are very good though, will take a trolley jack no problem and lock together very well, its hard to see the join on them That was lucky. Let me know if you have a spare 6mx4m 😂
CarbonWest - Chris Broster - Bristol & Bath AO Posted August 18, 2020 Posted August 18, 2020 10 hours ago, KugaWestie said: "Where the £$%& do I start with this..." or "This is such good quality I just need to top coat it..." Closer to 2nd than 1st I'd say!
KugaWestie Posted August 18, 2020 Author Posted August 18, 2020 13 hours ago, Tim (TimDave25) - Joint Thames Valley AO said: That was lucky. Let me know if you have a spare 6mx4m 😂 It was a case of being in the right place at the right time. “Put them in the back of my Ranger instead of the skip lads, cheers” I won’t have many spares. I will have managed to do both garages with them so a right result
KugaWestie Posted August 18, 2020 Author Posted August 18, 2020 13 hours ago, Chris Broster - Bristol & Bath AO said: "Where the £$%& do I start with this..." or "This is such good quality I just need to top coat it..." Closer to 2nd than 1st I'd say! Probably somewhere between the two would be my guess!
KugaWestie Posted August 22, 2020 Author Posted August 22, 2020 Flooring done and walls painted in the garage ready for the Cobra to come back. I also bolted the lift down to avoid slippage when driving onto it. One M16 bolt in each corner
Captain Colonial Posted August 22, 2020 Posted August 22, 2020 On 17/08/2020 at 20:37, KugaWestie said: “I’ve got no idea why he wants me to fit an old tailgate and the nearside front door from an old Golf, but I’ll give it a go!” 😂
KugaWestie Posted October 5, 2020 Author Posted October 5, 2020 Things have been moving on, the car is 2 pack high build primed now........
IainCameron Posted October 5, 2020 Posted October 5, 2020 Great to see you (and the car!) back... we've missed your updates!
Recommended Posts