corsechris Posted January 9, 2019 Posted January 9, 2019 You could do dimming with a slight adaption of @TableLeg method. Same wiring, but add a suitable(*) resistor across terminals 30 & 87 so when the sidelights come on and open the relay, the resistor gets put in series with the feed to the DRLs. (* best worked out by experiment from an initial value calculated to give about 10% of rated LED current at a guess) Quote
snowy892 Posted January 12, 2019 Author Posted January 12, 2019 Finally installed my DRL's. Phillips Kit with control unit. Made a bracket to sit under headlights and wired them in. Happy days. Thank you everyone for replying the topic. 6 Quote
snowy892 Posted January 13, 2019 Author Posted January 13, 2019 Noooooo. I plugged my CTEK trickle charger in and my DRL stay on!! Is it just a case of taking the fuse out to overcome this issue? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.