Leaderboard

I've upgraded to J K Seats and some 3" harnesses, hence I've got these available. 3D printed clips are included to prevent you being slapped by your own straps! 4 point black harness Note not all the mounting hardware will be provided as shown, you'll need to buy the 4 lower waist belts strap bolts to fasten to the chassis. I will provide the top hat washers though. You may also need some spacers-spacers I will included these though- Buckle covers & these-Eye bolt The new price is currently- £100 for the pair. Either collection from Stoke-on-Trent (or a Peak meet) or I'll post at your cost. Alternatively I'm generally in my office in Manchester (M20 2UR) on a Tuesday. My seats are identical to these-Sport Turbo- Black with white piping and includes the adjustable runners fitted too- runners They're certainly not as new as they've served me well for 9 years and have been used in all weathers. Hence they may need refurbishment and there are signs of rust as shown on the pictures below. There is a small tear in the driver’s seat from my IVA tester’s keys which were clipped to his belt. I’ve had quotes to repair it and have ignored it so far as you don’t see it when your driving 😄 Driver's Seat- New they would cost- Passenger seat I'll take £800 for them as they are. They will pass IVA. I'd prefer not to post due to size/weight and difficulty packing them. Hence collection only from Stoke-on-Trent or I'm generally in my office in Manchester (M20 2UR) on a Tuesday.

See you there

Will be there, and weather looking good so should have the Westy😃

Had some great views of the partial solar eclipse this morning. Took a couple of fairly average smartphone shots through the scope. Was able to share the views with Mrs Stu and Little Stu which was fun.

Installed "sound system" in Westfield, propably not best place for speakers in terms of sound, luckily I am far from being audiophile, so really happy with that Need to convert some audio files to mono from stereo and should be fine

I'll be there.

I have this one which is new and un drilled that I may let go for the right price, have been holding on to it as in two minds what to do.

I've booked a ticket for 1 also, so hopefully I'll see you there.

Siltech’s price list whilst dated May 2023 seems to be pretty close to their current pricing if not identical in my recent dealings with Dennis and Andy. https://www.siltechracing.com/_files/ugd/069f4e_d7a1f1ca967243369e22b117983b9c4a.pdf

Here is where we are going, see attached photo. Destination is The Yondermann Cafe, SK17 8RW. We will go via Hulme End, SK17 0EZ, and Crowdecote, SK17 0DB as shown above. We cut out Bakewell. For Andy @aeg, just in case he gets lost, it does really, actually go past Tagg Lane Dairy!!!

Lovely classic Westfield restoration, green as well👍. Whats the next project? can't have you loafing around 😀

You two are a right pair of Softies😀

It's fine, I'll live on biscuits and water for the rest of the month.

I've been thinking about ordering these for some time and finally got round to ordering them a week or so ago, and they arrived this week. I wanted a matching pair, and for my daughter to have the security of a six point harness to eliminate the risk of her slipping under the lap belts of the four point. I got the two free key rings (so I should think for the cost of the harnesses!) which match the car colours quite well. I've gone for the ultralite adjusters, and was very pleased with them when I drove to our meet last night.

Hi folks, I'm a newby member. Bought my 2000 kit build SE Narrow as a resto project from Bangers and Cash almost exactly 2 years ago. I'm an old fart, well into pensioner age and this was acquired as a 'memory lane' project having, in my late twenties, briefly owned an S2 Lotus 7 wearing 'The Prisoner' make-up. Upon collection from Pickering, closer inspection of the more or less stock 1600 Kent revealed that it had visibly blown a core plug and the decision was therefore made to carry out a 'zero hour' restoration on the whole car. The chassis was in pretty good nick for an exclusively track day'd car but everything else was tired. So, what have we done last year, this year, this week and today? Rear axle and brakes have been totally reworked with Quaife ATB LSD. Type 9 gearbox has been totally reworked. Front brakes are now Wilwood 4 pot. Rad has been flushed and restored. Engine build has been in the capable hands of Roger at Aldon Automotive in Brierley Hill, the work starting with a bare block chemical clean. Build has lightened flywheel, balanced and uprated bottom end and HD Helix clutch. Also has 244 cam, Duplex Vernier with access cover, Burton 2A big port/big valve head, HP oil pump, Samco hoses, Facet fuel pump, pressure regulator, new twin 45 DCOE's on Mangoletsi, uprated water pump with new alternator and Gates Tooth belt drive, Aldon electronic ignition and throwback lighting including headlight baskets and Lucas 1130 Torpedo sidelights. Car is in Westfield BRG with now of course, an LO7 yellow nosecone! Proper screen is waiting in my workshop together with wiper kit. Home made screen pillars (aka original Carbuilder/Lotus 7 style) yet to be formed from 5mm sheet ally. Stainless sheet ready to be English Wheeled to fit rear arches. Original Federal tyres had aged to consistency of concrete and (experimentally) replaced with Davanti Protoura road/track boots from Demon Tweeks. Bookend shots were at Bangers & Cash. Work in progress pics were taken at Aldon at beginning of year. Cost? Enough to initiate divorce procedings if my management finds out. Plans? Well here's a clue. I live 6 miles from Shelsley Walsh. Plus a mandatory photo shoot at Portmeirion! Best, NotMcGoohan

Don't know, so far I've washed a car, cut the lawn, cleaned the waterfall, been for a 5 mile walk. Going to have a rest now.

What life is no longer like for @Robin Parker (Red Spider) - Yorkshire AO:

I recall Ali scribbling this into the sand when she retired. Wonderful feeling. Obviously I am way too young to retire. One day I hope.

Here are some of the embarrassing photos of my retirement presentation. I did redeem myself by driving the Westfield into the factory, what could they do? Sack me?