Leaderboard

Up for grabs is my Scholar Racing engine 1.8 silvertop Zetec Covered just over 16,000miles Spec is as follows- ARP Rod bolts Ported and polished cylinder head Regrind piper cams Jenvey ITBs with piper cross filter Base manifold ported and matched to head MBE956 ECU Mapping lead Race loom Alternator and brackets All sensors, injectors and coil MBE is mapped to a set of Bosch injectors but one is temperamental (I will supply these injectors as they are fine for start up and to drive on to get the engine mapped), I'm supplying a set of ST170 injectors recently cleaned and flow tested but the ECU will need mapping for the ST injectors. Estimated power is around 175bhp This was a great engine and runs fine, No clutch, exhaust or thermostat housing supplied but with these bits sourced, you should have pretty much everything you need to get running. £1500ono Any questions, please give me a call on 07985266042. I could also supply the engine with a MoTeC M800 and UTC with a Rachan DR-25 loom and all sensors for an additional £2000.00 This included fuel pressure and oil pressure monitoring The MoTeC has been correctly mapped for the ST170 injectors

Regarding tank sizes! Mine is 2.0 zetec with standard tank, I did Glasgow to Leicester with one stop for fuel, I was on fumes coming onto the drive! Whilst driving I was quite happy to fuel up after a couple of hours, this gives an all needed mini break to your system then I am ready for the next tank. Done plenty of European trips on motorbikes covering ground at speed and the concentration needed is tiring hence happy to splash and dash. At Track days if the track doesn't have fuel I fuel up as near as possible and fill two five litre cans just to save me having to leave the circuit always been fine! The other thing is at the track I have always just dumped the fuel cans and anything else I didn't want in the car in a pile which was always there when I have come off circuit! I say don't over think stuff...

Still never got this code to work!! - are there anymore offers for the 'January sales' ? - help us to spend some of our Christmas money!

Post 14 is dated Oct 2005. I guess he's bought the Westy had some fun and moved on by now?

I should be in stu hills old car, 1600 with dog box at present.... Not sure what class that will put me in....

snakes have to eat too you know :laugh:

This is what I had made for Buttercup. It does go on a lot tighter than shown in the pictures. Have you tried talking to Soft Bits for Sevens.

I remember seeing Chris Maries rotary engine westfield many years ago - it blitzed everything in the WSC BARC series - when it passed noise tests and didn't set alight - awesome power unit