morgan100 Posted July 19, 2020 Share Posted July 19, 2020 Hey guys! New member/owner from West Lothian, Scotland Been keeping my eyes peeled for a Westfield now for sometime to replace my Integra as my track car. Imported the DC2 back in 2016 and with the value of clean examples on the rise it was starting to feel like a bit of a risk taking her out on track. I bought very rusty S2000 back at the end of 2018, broke it and managed to make my money back on the parts...minus the engine, box etc. I considered building a Westfield mega S2000 kit but in honesty didn't want the hassle of IVA etc. so I set about looking for an SEiW that I could install the f20c engine. A 1999 SEiW popped up for sale less than an hour from me, no build sheet or history but with my intention to use the S2000 engine I figured this was a good bargaining chip. Went and viewed the car and was happy enough to drive it away that day... 2.0L Zetec Raceline Engine 5 speed box Sierra Diff Weber Twin 40s Disc brakes all round Plan to use the car as much as I can for the rest of the summer then strip her down over the winter to do the engine swap and just generally tidy her up, powder coat the suspension arms etc. Engine will be up for sale once it's out so if anyone has any history on the car it would be greatly appreciated. The car has a WSCC sticker on the roll bar so I'm hoping someone on here recognises it and can tell me a bit more about it. While I plan to use the car for track days I will also be looking to do some road trips out to the West Coast etc. so first job is to try and find a windscreen kit (screen, mirrors, wipers etc). then wet gear, doors etc. If anyone can point me in the direction of a windscreen for sale or the best place to purchase it would be appreciated 1 Quote Link to comment Share on other sites More sharing options...
Gary Taylor Posted July 19, 2020 Share Posted July 19, 2020 Hi and welcome firstly that’s a nice looking car you have there. secondly for a screen etc look in the for sale section and post a wanted add or go to Westfield parts shop. for runs out keep an eye on the events section and look for clan McWesty, we have our mystery navigation run on Saturday 1st August starting off at happendon services message me your number and email and I can add you to the mailing list or give me a call on +447715554020 evenings ( not tonight please) cheers Gary Quote Link to comment Share on other sites More sharing options...
Michael Whitworth Posted July 19, 2020 Share Posted July 19, 2020 That Engine looks like it has been moved back a bit, not much room around the bellhousing. Quote Link to comment Share on other sites More sharing options...
morgan100 Posted July 22, 2020 Author Share Posted July 22, 2020 On 19/07/2020 at 14:29, Gary Taylor - Scotland AO said: Hi and welcome firstly that’s a nice looking car you have there. secondly for a screen etc look in the for sale section and post a wanted add or go to Westfield parts shop. for runs out keep an eye on the events section and look for clan McWesty, we have our mystery navigation run on Saturday 1st August starting off at happendon services message me your number and email and I can add you to the mailing list or give me a call on +447715554020 evenings ( not tonight please) cheers Gary Thanks Gary Will PM you my number and email to be added to the mailing list, although I'll be holding off on any long journeys until I source a screen and wet gear...too much of a risk in bonnie Scotland. 1 Quote Link to comment Share on other sites More sharing options...
Si.Dalziel Posted July 22, 2020 Share Posted July 22, 2020 I’m not sure if you will be able to do a straight swap without doing some chassis modifications or cutting the S2000 bell housing. Cracking car though by the looks of it! 1 Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted July 22, 2020 Share Posted July 22, 2020 ten or fifteen years ago, the S2000 was regarded as one of the hardest engine swaps to do in a Westfield. It's become much easier since then, due to Westfield themselves making an S2000 model. However, Westfield had the whole chassis re-designed to suit, so be aware, it's not the same as a standard car, by a long chalk. At least now though, you can buy loads of parts off the shelf, so to speak, to do the conversion. One of the main complications, is that the engine and gearbox are so physically big! When the factory were having the chassis re-developed for the Mega S2000 model, they used one of their existing chassis as a starting point, this was one with the widest transmission tunnel they made, and even then, it had to be tweaked wider! It also had the scuttle area modified to clear the bellhousing. Though most people trying to do the swap on existing cars end up cutting a big chunk out of the bellhousing, and have it plated over, instead. They do work really well in a Westfield though, and it's a hugely charismatic engine... 1 Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted July 22, 2020 Share Posted July 22, 2020 Also be aware, that compared to current standard Westfield's, the Mega S2000 has extra bracing around the rear diff area - current cars already have this strengthened compared to many nineties and earlier cars. As it's a know weak spot when higher power engines and sticky tyres are used. There's lots you could do to brace an older style rear though. Quote Link to comment Share on other sites More sharing options...
Kingster Posted July 22, 2020 Share Posted July 22, 2020 On 19/07/2020 at 14:22, morgan100 said: While I plan to use the car for track days I will also be looking to do some road trips out to the West Coast etc. so first job is to try and find a windscreen kit (screen, mirrors, wipers etc). then wet gear, doors etc. No need - just did 1000 miles around the Highlands with a lot of mixed weather. Also did 1500 miles or more around the alps a few years ago with 5 other aeroscreened cars. Just wear the right clothes and a helmet and forget the windscreen 👍 I personally know of two older cars with s2000 shoehorned in and @phil.mercboy still has his I believe. Not an easy job for sure but can be done. 1 Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted July 22, 2020 Share Posted July 22, 2020 1 minute ago, Chris King - Webmaster and Joint North East AO said: I personally know of two older cars with s2000 shoehorned in Yeah, probably around half a dozen I'm aware of, but it's one you need to go in with, with your eye's open! 1 Quote Link to comment Share on other sites More sharing options...
morgan100 Posted July 23, 2020 Author Share Posted July 23, 2020 18 hours ago, Chris King - Webmaster and Joint North East AO said: No need - just did 1000 miles around the Highlands with a lot of mixed weather. Also did 1500 miles or more around the alps a few years ago with 5 other aeroscreened cars. Your a braver man than me Chris 😨 19 hours ago, Si.Dalziel said: I’m not sure if you will be able to do a straight swap without doing some chassis modifications or cutting the S2000 bell housing. Sizing up the S2000 gearbox and the exisiting tunnel it looks like it will definately need some 'adjustment' to get everything to fit. Car will get completely stripped down once the MOT runs out early Oct and will take it from there. Need to get studying the S2000 build threads to try figure out where to have additional bracing etc installed. Quote Link to comment Share on other sites More sharing options...
Kingster Posted July 23, 2020 Share Posted July 23, 2020 13 minutes ago, morgan100 said: Your a braver man than me Chris 😨 haha - but honestly, @KennyP was with us and never actually fitted his roof - as it just gets too much condensation in there! (I believe that's right Ken?) - however, he does like his full screen 1 Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted July 23, 2020 Share Posted July 23, 2020 Mega S2000 chassis: Note, when comparing to an older chassis, some of the difference you’ll see aren’t unique to the S2000/Sport 250 chassis, they’re just improvements made to all cars over the last twenty years or so. Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted July 23, 2020 Share Posted July 23, 2020 Here you can get an idea of what has to be cut out of the bell housing to cope with a non S2000 chassis, (though note, the chassis this ‘box went in was till a wide transmission tunnel version, so extra mods way we’ll be needed on an MT75 tunnel car.) Here you can see where the bell housing has been plated over, and was being test fitted in the chassis. This is a car converted by an old member, Phil - posted as Lloydox on here. He does have a build thread with more info. Quote Link to comment Share on other sites More sharing options...
Si.Dalziel Posted July 23, 2020 Share Posted July 23, 2020 2 hours ago, morgan100 said: Sizing up the S2000 gearbox and the exisiting tunnel it looks like it will definately need some 'adjustment' to get everything to fit. check this build thread out it should give you a good idea of the clearance for the bellhousing. Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted July 23, 2020 Share Posted July 23, 2020 1 minute ago, Si.Dalziel said: check this build thread out it should give you a good idea of the clearance for the bellhousing. Well done Si, exactly the thread I was talking about! (Saved me a search!) 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.