Paul T Posted February 24, 2019 Share Posted February 24, 2019 As per title I’m after one of the 3 prong plastic connectors for a VDO vision gauge. As per picture, I’ve found them new in Gernany but nearly £15 posted so if anyone was an old connector or loom they could chop one off if he very greatful and have some £££ waiting Link to comment Share on other sites More sharing options...
Quinten Posted February 24, 2019 Share Posted February 24, 2019 You could just use spade connectors...? Link to comment Share on other sites More sharing options...
Quinten Posted February 25, 2019 Share Posted February 25, 2019 But as I was browsing ebay, came across these: https://www.ebay.co.uk/itm/2-x-H4-3-Pin-Headlight-Replacement-Repair-Bulb-Holder-Connector-Plug-Wire-Socket/263014921815?epid=1437932605&hash=item3d3ce93657:g:lwoAAOSwB-1Yx91n:rk:3:pf:0 They look mighty similar... 1 Link to comment Share on other sites More sharing options...
Jon Wilkinson Posted February 25, 2019 Share Posted February 25, 2019 Have you tried car builder solutions, they do loads of different connectors etc. 1 Link to comment Share on other sites More sharing options...
Paul T Posted February 25, 2019 Author Share Posted February 25, 2019 Thanks guys, @Quinten Uijldert , one of the guys in the Facebook group pointed out the H4 bulb connector should fit...I ordered one for £2.50 so hopefully it fits! thanks again for the quick responses Link to comment Share on other sites More sharing options...
neptune Posted March 1, 2019 Share Posted March 1, 2019 On 25/02/2019 at 11:24, Paul T (tr3m5) said: Thanks guys, @Quinten Uijldert , one of the guys in the Facebook group pointed out the H4 bulb connector should fit...I ordered one for £2.50 so hopefully it fits! thanks again for the quick responses Would you mind confirming if it fits as i will need the same Many thanks Link to comment Share on other sites More sharing options...
Paul T Posted March 2, 2019 Author Share Posted March 2, 2019 Bad news guys, unfortunately it’s not the same connector, the VDO is much narrower between the vertical terminals Link to comment Share on other sites More sharing options...
John (Kernow) Posted March 2, 2019 Share Posted March 2, 2019 I will have a look I chopped all of these from my loom but not sure if I still have them. Will let you know. John Link to comment Share on other sites More sharing options...
John (Kernow) Posted March 2, 2019 Share Posted March 2, 2019 I have three in total so @PaulT and @neptune if you cover the postage and PM me your address I will get them posted next week. Check that the connectors are correct in the photo. 1 Link to comment Share on other sites More sharing options...
neptune Posted March 2, 2019 Share Posted March 2, 2019 5 minutes ago, John (Kernow) said: I have three in total so @PaulT and @neptune if you cover the postage and PM me your address I will get them posted next week. Check that the connectors are correct in the photo. John thank you. WilI check my gauges when i'm back home tomorrow and pm you. Link to comment Share on other sites More sharing options...
Paul T Posted March 2, 2019 Author Share Posted March 2, 2019 Those are the ones, thanks @John (Kernow) I’ve PM’d you Link to comment Share on other sites More sharing options...
Paul T Posted March 4, 2019 Author Share Posted March 4, 2019 @John (Kernow) Did you get my message? cheers Link to comment Share on other sites More sharing options...
neptune Posted March 7, 2019 Share Posted March 7, 2019 On 02/03/2019 at 17:42, John (Kernow) said: I have three in total so @PaulT and @neptune if you cover the postage and PM me your address I will get them posted next week. Check that the connectors are correct in the photo. Hi John Pm'd you too Link to comment Share on other sites More sharing options...
Tim Reid Posted March 16, 2019 Share Posted March 16, 2019 I've got some spare too if anyone still needs them. 1 Link to comment Share on other sites More sharing options...
Recommended Posts