Jump to content

Quinten Uijldert

WSCC Member
  • Content Count

  • Joined

  • Last visited

  • Days Won


Quinten Uijldert last won the day on March 25 2018

Quinten Uijldert had the most liked content!

Community Reputation

581 Brilliant


About Quinten Uijldert

  • Rank
    tall dutch bloke
  • Birthday 03/09/1970

Profile Information

  • Car Details
    1998 Westfield SEW 1.8 Silvertop Zetec
  • My Location

Recent Profile Visitors

4,770 profile views
  1. Quinten Uijldert

    184bhp Westfield 1.6n/a road legal

    I wouldn't immediately dismiss those. In France they can only import older Westfields due to their strict regulations and yours would fit that requirement. And with the language barrier, the written word may come out a little different to what you would expect.
  2. Quinten Uijldert

    January 2019

    Nothing to report Last month: £ 8749.45This month: £ 0.00 ----------+Total: £ 8749.45
  3. Quinten Uijldert

    FW400 owners wanted.

    @Stu Faulkner can you contact Jody Arch on jody.arch @ btclick.com ? He asked me to forward you his email so you arrange to deal with him directly with regards to this one
  4. Quinten Uijldert

    FW400 owners wanted.

    I'll put the word out to an owner in the Northants area
  5. Quinten Uijldert

    Did this fall off my car?

    If its round, it could be a core plug?
  6. Quinten Uijldert

    E-mail preference

    https://forum.wscc.co.uk/forum/notifications/options/ top option
  7. Quinten Uijldert

    Too tall a thermostat housing on a xflow

    I've had the same issue with my oil cap when I swapped Xflow to Zetec. I put the nose cone on two 5mm thick alu strips, which in turn raises the bonnet just enough where it matters. You can't see the alu strips with the nose cone fitted.
  8. Quinten Uijldert

    December 2018

    Nothing to report Last month: £ 8749.45This month: £ 0.00 ----------+Total: £ 8749.45
  9. Quinten Uijldert

    November 2018

    The half shaft hubs are 'staggered' in circumference. So if they are 50mm wide (I do not know the exact dimensions), the 1st 40mm is the same diameter as the wheels, but the last 10mm is slightly bigger in diameter. So if I can machine the last 10mm to be the same diameter, my wheels will fit all the way against the hub flange, without having to resort to using a spacer. As it is this spacer (or rather the new ET on the new wheels) that prevent them from fitting in the arches.
  10. Quinten Uijldert

    3D printing (plastics)

    I've used https://www.3dhubs.com for 3D printing of some keyboard feet (the flip out ones to raise the keyboard). A pair was £5 (incl £3 postage), and I had it in less than a week. You can pick the material and supply your own file. Quality was good and a year later still holds the keyboard up.
  11. Quinten Uijldert

    November 2018

    November 2nd, 2018 Spend: £0.00 Oooh, it's fresh today... November 29th, 2018 Spend: £0.00 Realistically, I'm not seeing the weather being nice enough to drive the car to work and back without getting p*ssed on, so I SORNed it today. I need to get the half-shafts machined so my new wheels fit, and I need to take the petrol tank out to re-fit the pump so it reads on the gauge again. Plenty to do this winter! Last month: £ 8749.45This month: £ 0.00 ----------+Total: £ 8749.45
  12. Quinten Uijldert

    Kitfest 2019 Santa pod

    Looks like it is just a clubstand of NWKOC at the Retro Show: http://www.retroshow.co.uk/index.php ?
  13. Quinten Uijldert

    October 2018

    October 5th, 2018 Spend: £0.00 What a muppet... ran out of petrol on the way into work. Must! Fix! The! Petrol! Gauge! Last month: £ 8749.45This month: £ 0.00 ----------+Total: £ 8749.45
  14. Quinten Uijldert

    Winter wear

    I use waterproof+windproof snowboarding gear over my normal clothes. Layers is the key to keeping warm though. Motorcycle gloves are also good, but very stiff.
  15. Quinten Uijldert

    Speedo reading slow

    Would this help?

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.