B.RAD Posted February 16, 2019 Share Posted February 16, 2019 7 minutes ago, Ben (bunje) said: Looks good I need to take it all out to dry it out. Changed a fuse today in the box on the drivers side and water came out of the fuse hole Ha ha!! Oh dear. She's a wet prawn. Just rip it all out mate. Check all the drain holes are clear and leave it at that. Quote Link to comment Share on other sites More sharing options...
B.RAD Posted February 16, 2019 Share Posted February 16, 2019 27 minutes ago, Archibald Meatpants said: GT3 RS door pulls must knock off 10s a lap at Bedford Easily. And the elbow space allows for superior drift legend status. Quote Link to comment Share on other sites More sharing options...
maurici Posted February 17, 2019 Share Posted February 17, 2019 Oh. The prawn! Quote Link to comment Share on other sites More sharing options...
BenD Posted February 17, 2019 Author Share Posted February 17, 2019 I've made a start this afternoon 3 Quote Link to comment Share on other sites More sharing options...
BenD Posted March 7, 2019 Author Share Posted March 7, 2019 @BCF what roll bar do you have in your ****ter? Quote Link to comment Share on other sites More sharing options...
TAFKARM Posted March 7, 2019 Share Posted March 7, 2019 GC Fabrications. Quote Link to comment Share on other sites More sharing options...
AdamR Posted March 7, 2019 Share Posted March 7, 2019 They're all of a muchness really, not fixed to anything very substantial, so a 6 point is better if you can get one, at least then it reaches the floor. That said I think you'd do very well to roll one unless something odd happened! Quote Link to comment Share on other sites More sharing options...
BenD Posted March 7, 2019 Author Share Posted March 7, 2019 @Archibald Meatpants gc fabs was my first choice. but ive also seen a cusco that goes to the floor besides the seats. second hand prices seem almost as much a buying new. Quote Link to comment Share on other sites More sharing options...
BenD Posted March 7, 2019 Author Share Posted March 7, 2019 6 minutes ago, AdamR said: They're all of a muchness really, not fixed to anything very substantial, so a 6 point is better if you can get one, at least then it reaches the floor. That said I think you'd do very well to roll one unless something odd happened! never say never lol i have seen an mx5 in a scrappy that had been rolled without a bar it was pretty flat lol Quote Link to comment Share on other sites More sharing options...
TAFKARM Posted March 7, 2019 Share Posted March 7, 2019 It wasn’t a recommendation, just what Barny’s got. I’ve thankfully never been in Barny’s ****ter with him on top. FWIW back in the day I had a TR Lane on mine, but no one mentions them anymore. 1 Quote Link to comment Share on other sites More sharing options...
BenD Posted March 7, 2019 Author Share Posted March 7, 2019 trlane do seem to get some bad press but like adam says none of them seem to be fixed to anything substancial Quote Link to comment Share on other sites More sharing options...
AdamR Posted March 7, 2019 Share Posted March 7, 2019 Bit of half inch gas pipe and some 1/8" plate? Worked well for me. 1 Quote Link to comment Share on other sites More sharing options...
BenD Posted March 7, 2019 Author Share Posted March 7, 2019 i was looking at going full cage but that takes away from my budget track car. Quote Link to comment Share on other sites More sharing options...
AdamR Posted March 7, 2019 Share Posted March 7, 2019 A full cage-worth if material cost me £35 (plus a bit of gas and some welding wire obviously)... Quote Link to comment Share on other sites More sharing options...
Andrew Posted March 7, 2019 Share Posted March 7, 2019 13 minutes ago, AdamR said: Bit of half inch gas pipe and some 1/8" plate? Worked well for me. Was it ever tested? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.