B.RAD Posted February 16, 2019 Posted February 16, 2019 7 minutes ago, Ben (bunje) said: Looks good I need to take it all out to dry it out. Changed a fuse today in the box on the drivers side and water came out of the fuse hole Ha ha!! Oh dear. She's a wet prawn. Just rip it all out mate. Check all the drain holes are clear and leave it at that. Quote
B.RAD Posted February 16, 2019 Posted February 16, 2019 27 minutes ago, Archibald Meatpants said: GT3 RS door pulls must knock off 10s a lap at Bedford Easily. And the elbow space allows for superior drift legend status. Quote
BenD Posted February 17, 2019 Author Posted February 17, 2019 I've made a start this afternoon 3 Quote
BenD Posted March 7, 2019 Author Posted March 7, 2019 @BCF what roll bar do you have in your ****ter? Quote
AdamR Posted March 7, 2019 Posted March 7, 2019 They're all of a muchness really, not fixed to anything very substantial, so a 6 point is better if you can get one, at least then it reaches the floor. That said I think you'd do very well to roll one unless something odd happened! Quote
BenD Posted March 7, 2019 Author Posted March 7, 2019 @Archibald Meatpants gc fabs was my first choice. but ive also seen a cusco that goes to the floor besides the seats. second hand prices seem almost as much a buying new. Quote
BenD Posted March 7, 2019 Author Posted March 7, 2019 6 minutes ago, AdamR said: They're all of a muchness really, not fixed to anything very substantial, so a 6 point is better if you can get one, at least then it reaches the floor. That said I think you'd do very well to roll one unless something odd happened! never say never lol i have seen an mx5 in a scrappy that had been rolled without a bar it was pretty flat lol Quote
TAFKARM Posted March 7, 2019 Posted March 7, 2019 It wasn’t a recommendation, just what Barny’s got. I’ve thankfully never been in Barny’s ****ter with him on top. FWIW back in the day I had a TR Lane on mine, but no one mentions them anymore. 1 Quote
BenD Posted March 7, 2019 Author Posted March 7, 2019 trlane do seem to get some bad press but like adam says none of them seem to be fixed to anything substancial Quote
AdamR Posted March 7, 2019 Posted March 7, 2019 Bit of half inch gas pipe and some 1/8" plate? Worked well for me. 1 Quote
BenD Posted March 7, 2019 Author Posted March 7, 2019 i was looking at going full cage but that takes away from my budget track car. Quote
AdamR Posted March 7, 2019 Posted March 7, 2019 A full cage-worth if material cost me £35 (plus a bit of gas and some welding wire obviously)... Quote
Andrew Posted March 7, 2019 Posted March 7, 2019 13 minutes ago, AdamR said: Bit of half inch gas pipe and some 1/8" plate? Worked well for me. Was it ever tested? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.