JamesGN Posted February 28, 2021 Posted February 28, 2021 2 minutes ago, AndyMM said: guilty as charged, nice day tho. Was good to meet another owner, my run back home was great fun. Quote
AndyMM Posted February 28, 2021 Posted February 28, 2021 5 minutes ago, JamesGN said: Was good to meet another owner, my run back home was great fun. nice to meet you too, be good to get out properly if lockdown ever ends. Quote
AlanHodge Posted March 14, 2021 Posted March 14, 2021 Nearly ready for taxing at start of next month and hopefully some runs out soon. Picnic basket ready and rack fitted, thanks for the great idea @Dean Goodall 3 1 Quote
Richard (OldStager) Posted March 14, 2021 Posted March 14, 2021 22 minutes ago, AlanHodge said: Nearly ready for taxing at start of next month and hopefully some runs out soon. Picnic basket ready and rack fitted, thanks for the great idea @Dean Goodall Looking good there Alan, I like the basket as well. I need a stronger bootlid before I can do that though. Roll on summer and better days. 1 Quote
Dean Goodall Posted March 14, 2021 Posted March 14, 2021 Looks class that Alan. Thanks for the mention. 1 Quote
HB46443 Posted March 14, 2021 Posted March 14, 2021 Recent Snap of your Westfield. We are ready for those trips out. 4 Quote
Mark Tearney Posted March 15, 2021 Posted March 15, 2021 Almost finished my winter upgrades, Acquired a fully forged 1.8L Silvertop zetec with OJZ over bonnet exhaust system bought a new BGH Geartech E8 type 9 and a Quaife ATB diff. In Northampton motorsport today for a rolling road session and mapping to hopefully remove a flat spot and get it running to its full potential. Fingers crossed for some dry weather when I collect it tomorrow. 6 Quote
CarbonWest - Chris Broster - Bristol & Bath AO Posted March 15, 2021 Posted March 15, 2021 6 hours ago, Mark Tearney said: Acquired a fully forged 1.8L Silvertop zetec with OJZ over bonnet exhaust system bought a new BGH Geartech E8 type 9 and a Quaife ATB diff. What numbers did you get at NMS and how does it drive, sounds like quite a package? Quote
Mark Tearney Posted March 16, 2021 Posted March 16, 2021 2 hours ago, Chris Broster - Bristol & Bath AO said: What numbers did you get at NMS and how does it drive, sounds like quite a package? I've left it with them over night and won't be collecting it until tomorrow sometime, hoping they can achieve around 220bhp and decent torque and get rid of a flat spot just before it hits 5k..it really comes alive after 5 but I want it checked over before I give it any real stick. Not really had the weather so far this year to put it to the test properly so once the engine is sorted I'll book up a few track days after a trip to Bedford to get a noise test. Quote
Benrobson2999 - Kent AO Posted March 16, 2021 Posted March 16, 2021 15 hours ago, Mark Tearney said: Almost finished my winter upgrades, Acquired a fully forged 1.8L Silvertop zetec with OJZ over bonnet exhaust system bought a new BGH Geartech E8 type 9 and a Quaife ATB diff. In Northampton motorsport today for a rolling road session and mapping to hopefully remove a flat spot and get it running to its full potential. Fingers crossed for some dry weather when I collect it tomorrow. Nice. Be interested to see your MSA roll bar into the boot cut outs. Any advice there!? Quote
Mark Tearney Posted March 16, 2021 Posted March 16, 2021 1 hour ago, Benrobson2999 said: Nice. Be interested to see your MSA roll bar into the boot cut outs. Any advice there!? I'll get a photo when it's back. 1 Quote
Mark Tearney Posted March 16, 2021 Posted March 16, 2021 16 hours ago, Chris Broster - Bristol & Bath AO said: What numbers did you get at NMS and how does it drive, sounds like quite a package? Very pleased with the results, 210bhp (183 at the Wheels) and 154 lbft torque. Not bad from an old 1.8L Silvertop. Needed a new Fuel pressure regulator as the old unit was the cause of the poor running. Brilliant service from NMS and much less than I expected to pay out. The Westfield is now a new car, my first impression was pretty much F#$k me it's a weapon it just pulls and don't stop. 2 Quote
Mark Tearney Posted March 16, 2021 Posted March 16, 2021 9 hours ago, Benrobson2999 said: Nice. Be interested to see your MSA roll bar into the boot cut outs. Any advice there!? Any use? 1 Quote
CarbonWest - Chris Broster - Bristol & Bath AO Posted March 17, 2021 Posted March 17, 2021 On 16/03/2021 at 13:20, Mark Tearney said: Very pleased with the results, 210bhp (183 at the Wheels) and 154 lbft torque. Not bad from an old 1.8L Silvertop. Needed a new Fuel pressure regulator as the old unit was the cause of the poor running. Brilliant service from NMS and much less than I expected to pay out. The Westfield is now a new car, my first impression was pretty much F#$k me it's a weapon it just pulls and don't stop. Cheers Mark, that's impressive and I bet its lovely to drive now. Regards Chris Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.