Search the Community
Showing results for tags 'roll'.
Found 4 results
-
Does anyone have any experience with this type of rollbar? It’s been advertised as an MSA rollbar but it is slightly different to the ones I’ve seen previously. The three differnences I can see are: 1. The vertical sides (playskool’s ones are slightly tapered I believe) 2. It has a rear brace above the tank (assume would clash with the LR tank) 3. The rear chassis mounts are fixed rather than a sliding joint or rose joint. Can anyone offer any advice? I’ve been trying to get a playskool one but no joy and this has come up locally. Cheers @Luke Algar maybe this is an old one of yours?
-
As per title, keen for the single brace version as below. happy to exchange for RAC type which is currently on the car (bottom rose joints - see pic)
-
Having just finally fitted and riveted my 2 side panels and rear tub i then put in the 4 point harness eye bolts in to the top of the rear tub, I next wanted to fit the rear roll bar. In the fitting manual I have it suggest this should be 70mm in from the back edge, and this feel like its in the centre of the flat steep plate on the rear of the chassis i though I'd just check, does this look correct? I realise that most people fit a better rear cage, but this is what i have ATM, and I found that the FW manual for the rear eye bolts was way out,and fortunately i had a better way of lining these up, so they are all in OK, but the FW manual does not see to have anything about the rear cage in it. Marked out ready to be confirmed then too the distance between centres of my roll bar Much appreciate any help
-
Good Afternoon, We will be having a full cage coming into stock on Tuesday 27th February. If you are interested, could you please contact the parts department on 01384 400077 or email us at parts@westfield-sportscars.co.uk. Feel free to ask any further questions. Westfield Parts Department.
