Search the Community
Showing results for tags 'bonding'.
Found 1 result
-
Ok, just started looking at the rear lights on my Sport 250 build, think I've figured out what goes in what holes etc. Reversing and rear fog quite easy, although WF short on fitting nyloc nuts/washers. Looking at the LED ring/indicator - fitted yellow bulbs (for now as intend to switch to LED in the future) into the clear holder and can see then see how they screw into the outer ring with the 3 self-tappers. FW manual talks about bonding these into the rear tub with "Nail's" type products, and I'm looking for suggestions? Am I right to assume that the idea is to drill 3 matching holes through the tub, to match up with the 3 holes in the ring indicator, and then use some mastic (Nail's) type stuff to make it water-tight,and screw through from the inside, through the tub, into the ring? On the reflectors, am I also right to assume you just push the reflector into the middle of the red ring,and then fix in the same way as the brake/indicator? If so i think I'm also missing the self-tappers for this from WF? Appreciate any help and recommendations PS - i bought some Puraflex 40 for panel fitting, would this work for the lights? ;-
