Electric Mirrors Upgrade - Part 3
Entry posted by KugaWestie
2,720 views
A bit of fresh air was needed today, so I used some fine cutting compound, followed by Autoglym SRP and finally some wax. Three coats of each left me with this
Then I cleaned the mirror glass and applied some Rainex. I also cleaned the plastic glass surround with some trim detailer
And finally I re-assembled the mirror
The windscreen pillars need a small amount of modifying. I drilled out the fixing holes to enlarge the diameter of them. This allows the mirror to be rotated slightly to make it more vertical as without this it points a little bit too much skywards. You will also see an additional hole that I have drilled to feed the cables through
-
1
3 Comments
Recommended Comments