Jump to content

KugaWestie's Blog

  • entries
    8
  • comments
    47
  • views
    16,177

Electric Mirrors Upgrade - Part 2


KugaWestie

2,891 views

I picked the job up again this afternoon, and decided to fit the switch into the dashboard.

Firstly I chose my position

Positionmarked.jpg

Then I cut away the vinyl and foam very carefully, followed by drilling a series of holes to form the square hole

Holeallreadyforswitch.jpg

Pieceofdashdrilledout.jpg

After some tidying up with a file, the switch is in

Switchfitted.jpg

Switchfittedsideview.jpg

Whilst out collecting some last minute bits today, I picked up a can of top coat paint.

I sanded one of the primed mirrors down with 800 grit wet and dry, and gave it a couple of coats.

Sprayedbeforepolisha.jpg

Sprayedbeforepolish.jpg

More to follow - but thats it for a few days now!

  • Like 1

9 Comments


Recommended Comments

deanoecosse

Posted

Looking good so far Gary. Are these mirrors a direct replacement for the Metro ones or do you need to do a bit of modifying?

Link to comment
KugaWestie

Posted

Thanks Dean

 

A very slight fettle needed on the pillars, you will see in my next update

Link to comment
Gary Argent

Posted

Hi Gary - I'm planning to do this modification on my Westie soon - I've managed to pick up two mirrors on eBay which seem to be in quite good condition.  Can you remember which primer and top coat you used, as I also want to spray mine black?  Thanks.

Link to comment
KugaWestie

Posted

On 19/04/2023 at 18:40, Gary Argent said:

Hi Gary - I'm planning to do this modification on my Westie soon - I've managed to pick up two mirrors on eBay which seem to be in quite good condition.  Can you remember which primer and top coat you used, as I also want to spray mine black?  Thanks.


Jesus, that’s over 10 years ago! 😂
 

Hycote rattle cans I think

  • Thanks 1
Link to comment
Gary Argent

Posted

15 hours ago, KugaWestie said:


Jesus, that’s over 10 years ago! 😂
 

Hycote rattle cans I think

Thanks Gary.  Might be 10 years ago but the blog has been very useful to me, planning a similar project!  I've ordered some rattle cans, will let you know how I get on.

  • Like 1
Link to comment
Dave Eastwood (Gadgetman) - Club Chairman

Posted

It’s such a comparatively simple mod in the scheme of things, yet just makes the whole driving experience “better” in a subtle way; you don’t tend to realise till you start using the confusion, how often you end up putting up with badly adjusted mirrors, where you can’t quite see behind you properly, and how much extra stress that can add.

  • Like 2
Link to comment
Flying Carrot Steve

Posted

On 22/04/2023 at 11:34, Dave Eastwood (Gadgetman) - Club Chairman said:

It’s such a comparatively simple mod in the scheme of things, yet just makes the whole driving experience “better” in a subtle way; you don’t tend to realise till you start using the confusion, how often you end up putting up with badly adjusted mirrors, where you can’t quite see behind you properly, and how much extra stress that can add.

Sorry Dave but what do you mean 'start using the confusion'? It's a typo I'm sure but I can't figure out what the correct word should be 

Link to comment
Dave Eastwood (Gadgetman) - Club Chairman

Posted

Conversion.

 

as in, start using the conversion,

  • Thanks 1
Link to comment
Flying Carrot Steve

Posted

Personally I find my mirrors are great and don't move unless I knock them walking down the side of the car inside the garage. I also have a Longacre rear view mirror which shows me pretty much everything, way better than a standard tin-top set-up does, so I never find myself in the situation of having to adjust them on the move. 

Link to comment
×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.