Jump to content
Store Testing In Progress ×

KugaWestie's Blog

A blog by KugaWestie in General

  • entries
    8
  • comments
    47
  • views
    16,174

Electric Mirrors Upgrade - Part 3

KugaWestie

Entry posted by KugaWestie

2,712 views

 Share

A bit of fresh air was needed today, so I used some fine cutting compound, followed by Autoglym SRP and finally some wax. Three coats of each left me with this

PolishedandWaxed.jpg

Then I cleaned the mirror glass and applied some Rainex. I also cleaned the plastic glass surround with some trim detailer

ReadytoAssemble.jpg

And finally I re-assembled the mirror

Assembled.jpg

Assembleda.jpg

The windscreen pillars need a small amount of modifying. I drilled out the fixing holes to enlarge the diameter of them. This allows the mirror to be rotated slightly to make it more vertical as without this it points a little bit too much skywards. You will also see an additional hole that I have drilled to feed the cables through

Fettledpillar.jpg

  • Like 1
 Share

3 Comments

Recommended Comments

Kit Car Electronics

Kit Car Electronics 2,310

Posted

Love it! I always find I've knocked the mirrors right after I've strapped myself in - I guess this solves that problem...

  • Like 1
Link to comment
KugaWestie

KugaWestie 5,007

Posted

Thanks R7 - yes that is exactly the reason for doing it - my car is fairly tight to get round in the garage, and I also find myself unstrapping and adjusting mirrors on a regular basis.

 

Once the electric mirrors are set, I am hoping they will stay in position!

Link to comment
×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.