smithy Posted November 30, 2010 Posted November 30, 2010 WORKS VAUXHALL RACE ENGINE NUMBER VR030 BTCC JOHN CLELAND GENUINE 300BHP 'REVERSE HEAD' RACING ENGINE, 2 LITRE ALL STEEL SHORT STROKE. INC ALL ANCILLARIES, (240MM STEEL FLYWHEEL, AP 5.25" TWIN PLATE CLUTCH, MBE WIRING LOOM, MBE ECU, INDUCTION, DRY SUMP, AIR FILTER, EXHAUST, ARK RACING STARTER. FULL REBUILD IN 2009 (WITH RECIEPTS, DYNO SHEET)ONLY DONE APPROX 100 MILES SINCE IN MY HILLCLIMB/SPRINT CAR. INC NEW ECU, CLUTCH, AIR FILTER) BRIEF SPEC- 88MM BORE/82MM STROKE, STEEL BILLET SK8045 TOURING CAR CRANK COSWORTH PISTONS CARRILLO RODS COMP RATIO 12.6:1 ITG F1 FILTER CARBON INTAKES MAGNESIUM TWIN ROLLER THROTTLE BODIES BILLET CAMS MBE970V16 ECU. MAGNESIUM CAM COVER VERNIER PULLEYS BILLET POSTS. RING FOR FULL SPEC THIS ENGINE IS BULLET PROOF, PROVIDES CLEAN SMOOTH POWER FROM 2K RPM ALL THE WAY UP, WOULD MAKE A GOOD RALLY ENGINE OR ANY OTHER DISCIPLINE. ANY INSPECTION WELCOME. ANY QUERIES MARK SMITH 07814566875
Tigger Posted November 30, 2010 Posted November 30, 2010 What a weapon that is, somebody with money is going to get lucky this winter
Dave Eastwood (Gadgetman) - Club Chairman Posted November 30, 2010 Posted November 30, 2010 Is it wrong of me to covert this?
jeff oakley Posted November 30, 2010 Posted November 30, 2010 Is it wrong of me to covert this? So long as it is not your neighbours wife, you'll be fine Never sure if religous jokes work
SteveD Posted December 1, 2010 Posted December 1, 2010 f**k its the welsh tossa ! orite welsh boy what does it rev to ,and what ratio is it
John Loudon - Sponsorship Liaison Posted December 1, 2010 Posted December 1, 2010 Where's Pete G with all the dosh
Tigger Posted December 1, 2010 Posted December 1, 2010 Where's Pete G with all the dosh I think he's all spent out thank goodness
John Loudon - Sponsorship Liaison Posted December 1, 2010 Posted December 1, 2010 Price? Ring the number and ask
Tigger Posted December 1, 2010 Posted December 1, 2010 Price? Ring the number and ask More than likely not what it cost to build so it's going to be a bargain whatever
Terry Everall Posted December 1, 2010 Posted December 1, 2010 Its on Pistonheads at about £13.5k I think
John Loudon - Sponsorship Liaison Posted December 1, 2010 Posted December 1, 2010 Terry - its got a reverse head so would fit where a Duratec / Millington once went
pete g Posted December 1, 2010 Posted December 1, 2010 Price? Ring the number and ask pmsl watch this space
cidersurfer Posted December 1, 2010 Posted December 1, 2010 Price? Ring the number and ask I thought you had to put prices on ads?
Recommended Posts