stephenh Posted November 23, 2010 Share Posted November 23, 2010 I find it much easier to read something like this excellent article when it is on paper rather than on screen, so defo in the magazine please! Quote Link to comment Share on other sites More sharing options...
Frosty Posted November 23, 2010 Share Posted November 23, 2010 Very good article. It's nice to see something written which can go into practical detail with physics, but without needing huge amounts of maths to go with it. I think the importance of getting across how a tyre makes its grip is very important. Most people subscribe to the "wider rubber = more grip" misconception, but this article gives a practical example of how this is not the case, without even meaning to. Very readable and informative. Well done. Quote Link to comment Share on other sites More sharing options...
Arm Posted November 23, 2010 Share Posted November 23, 2010 QUOTE was thinking of suggesting that I could maybe do a couple of talks at the Cheshire Meet over winter - each would be an hour long and go into the basics of Suspension and handling to help people understand? Oooh can I come along and ask questions ? Quote Link to comment Share on other sites More sharing options...
SteveD Posted November 23, 2010 Share Posted November 23, 2010 I find it much easier to read something like this excellent article when it is on paper rather than on screen, so defo in the magazine please! just press print Quote Link to comment Share on other sites More sharing options...
mark.anson Posted November 23, 2010 Share Posted November 23, 2010 was thinking of suggesting that I could maybe do a couple of talks at the Cheshire Meet over winter - each would be an hour long and go into the basics of Suspension and handling to help people understand? Oooh can I come along and ask questions ? Quote Link to comment Share on other sites More sharing options...
nikpro Posted November 23, 2010 Author Share Posted November 23, 2010 was thinking of suggesting that I could maybe do a couple of talks at the Cheshire Meet over winter - each would be an hour long and go into the basics of Suspension and handling to help people understand? Oooh can I come along and ask questions ? StevieD will be the doorman on the night; anybody causing trouble in the crowd will be removed and p****d on (Especially beardies) Quote Link to comment Share on other sites More sharing options...
stephenh Posted November 23, 2010 Share Posted November 23, 2010 I find it much easier to read something like this excellent article when it is on paper rather than on screen, so defo in the magazine please! just press print Yes but then I get the whole thread, your bits included! Quote Link to comment Share on other sites More sharing options...
Blatman Posted November 24, 2010 Share Posted November 24, 2010 Highlight the bits you need. Press print, or right click and choose "print". In the box that opens, there should be an option to "Print Selection" Tick it or put a spot in it or whatever is required. Then only the bits you highlight will be printed. Works on just about anything although occasionally some web formats don't work too well. It'll work here OK though... Quote Link to comment Share on other sites More sharing options...
stephenh Posted November 24, 2010 Share Posted November 24, 2010 Thanks Blatman, I'll try that. Quote Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted November 24, 2010 Share Posted November 24, 2010 Or even shift and Print Screen together, paste it into MS Paint or similar, crop off the s***e and then copy and paste into Word and print Quote Link to comment Share on other sites More sharing options...
Arm Posted November 24, 2010 Share Posted November 24, 2010 QUOTE (Especially beardies) I'll arrive in disguise ! Are your calculations in radians or degrees ? Quote Link to comment Share on other sites More sharing options...
cast iron Posted November 24, 2010 Share Posted November 24, 2010 Top Stuff Quote Link to comment Share on other sites More sharing options...
stephenh Posted November 24, 2010 Share Posted November 24, 2010 Highlight the bits you need. Press print, or right click and choose "print". In the box that opens, there should be an option to "Print Selection" Tick it or put a spot in it or whatever is required. Then only the bits you highlight will be printed. Works on just about anything although occasionally some web formats don't work too well. It'll work here OK though... Tried that, and its printed the lot! warts and all. I'll just have to put the unwanted sheets in the karzie, they might be of some use there. Quote Link to comment Share on other sites More sharing options...
Asterix Posted November 24, 2010 Share Posted November 24, 2010 ...really enjoyed that article Nik - agree with all the previous complimentary statements. If any of you guru's were going to do online lessons (e.g. Wiziq) in racecar setup, count me in (we'd better start with the basics ). Quote Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted November 24, 2010 Share Posted November 24, 2010 Nikpro to the Derby and Notts area meeting please Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.