geofff Posted July 6, 2005 Author Share Posted July 6, 2005 bttt See top post for state of play. Link to comment Share on other sites More sharing options...
geofff Posted July 6, 2005 Author Share Posted July 6, 2005 Final picture of kit for sale: Ta Geoff Does anyone know what the gearbox / engine mount thing is? Type 9? Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted July 6, 2005 Share Posted July 6, 2005 The mount bracket looks like a chassis end of and engine mount setup from Westfield. I may be interested in the gearbox. Do you have a piccie? Interested to know what input shaft dia / no of splines is and whether gearstick screws in or bolts in with 3 bolts. Also what gearshift pattern is reverse in? To left of 1st? John Link to comment Share on other sites More sharing options...
geofff Posted July 6, 2005 Author Share Posted July 6, 2005 Hi John, The gearbox is round my lock up. Definitely screw in. Definitely reverse to left of 1st. I'll put a piccy on tonight if I can or sometime this week plus other dimensions requested. Ta Geoff Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted July 7, 2005 Share Posted July 7, 2005 Consider me to be highly interested suggest to the other criteria. Is it complete and where abouts are you? Swindon ish? John Link to comment Share on other sites More sharing options...
geofff Posted July 7, 2005 Author Share Posted July 7, 2005 Hi John, Central Swindon. I will have time to take piccy tonight and post dimensions. No problem. Ta Geoff Link to comment Share on other sites More sharing options...
michaelcoombs Posted July 7, 2005 Share Posted July 7, 2005 What size are the master cylinders…. (should be cast in to the side) Thanks Michael Link to comment Share on other sites More sharing options...
geofff Posted July 7, 2005 Author Share Posted July 7, 2005 Hi Michael, I think they are .625 for two of them and the other is the imperial equivalent. I'll double check and post tonight. Ta Geoff Link to comment Share on other sites More sharing options...
geofff Posted July 8, 2005 Author Share Posted July 8, 2005 Hi, Michael: 7.0 two of, 5/8 one of. John: 1" diameter shaft in to and out of gearbox, 175mm input shaft (engine shaft) from face of gbox, splines in (engine) 23 and out (prop) 24/25 - I was getting crossed eyed at this point! Picture below: The picture also shows one of the three Banjo casings that DickieB was interested in. Ta Geoff Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted July 8, 2005 Share Posted July 8, 2005 Geoff, PM sent John Link to comment Share on other sites More sharing options...
geofff Posted July 12, 2005 Author Share Posted July 12, 2005 bttt See top post for state of play. Link to comment Share on other sites More sharing options...
Recommended Posts