Pixie Posted Friday at 12:25 Posted Friday at 12:25 Does anybody have a single spacer for the harness eye bolts, or know where to get the right ones. Wary of getting something that isn’t the correct strength. Here’s what I’m after -
Matt_S Posted Friday at 12:58 Posted Friday at 12:58 Just make sure you have enough thread showing through the bottom of the chassis threaded sleeves 1
Mark (smokey mow) Posted Friday at 22:51 Posted Friday at 22:51 I assume you’ve tried Westfield? https://www.westfield-sportscars.co.uk/shop/1417056-harness-eye-bolt-mounting-spacer-7670#attr= 1
Insuranceman Posted Monday at 11:49 Posted Monday at 11:49 On 13/02/2026 at 12:25, Pixie said: Does anybody have a single spacer for the harness eye bolts, or know where to get the right ones. Wary of getting something that isn’t the correct strength. Here’s what I’m after - Are these any use?
Pixie Posted Monday at 12:14 Author Posted Monday at 12:14 Thanks @Insuranceman & @Mark (smokey mow), ordered one through Westfield, was hoping to avoid the postage cost, but turns out there’s a few things on there we wanted anyway so it wasn’t all that bad in the end. thanks again! 1
LoneWolf Posted Monday at 15:15 Posted Monday at 15:15 How tall are those spacers, if anyone can measure them please? Sorry to hijack the thread.
Pixie Posted Monday at 16:37 Author Posted Monday at 16:37 1 hour ago, LoneWolf said: How tall are those spacers, if anyone can measure them please? Sorry to hijack the thread. Brand new ones? If so, I’ll measure it when it arrives. 1
Mark (smokey mow) Posted Monday at 18:13 Posted Monday at 18:13 2 hours ago, LoneWolf said: How tall are those spacers, if anyone can measure them please? Sorry to hijack the thread. From memory they’re 1” as the extended harness eye bolts have a 2” long thread. 1
Pixie Posted 1 hour ago Author Posted 1 hour ago On 16/02/2026 at 15:15, LoneWolf said: How tall are those spacers, if anyone can measure them please? Sorry to hijack the thread. As @Mark (smokey mow) said, 1 inch tall, without verniers I can’t measure accurately, but the ID looks to be 1/2 inch, OD is just over 20mm, 0.8 inch or 4/5 inch, take your pick 1
Insuranceman Posted 44 minutes ago Posted 44 minutes ago On 16/02/2026 at 15:15, LoneWolf said: How tall are those spacers, if anyone can measure them please? Sorry to hijack the thread. Measured in imperial and metric. 1
Recommended Posts