What the postie brought today!

[Benrobson2999 - Kent AO]

[Flying Carrot Steve]

2 hours ago, Benrobson2999 - Kent AO said:

 

Didn't realise pornography was allowed on here 😬

[Benrobson2999 - Kent AO]

Highly recommended @Tillett Car Seats. David is very helpful and easy to deal with 👍🏼

[Tillett Car Seats]

Ben  Very nice to meet yesterday and thank you for your busuness. You got stuck in to fitting them quickly ready for enjoying nice crisp autumn days. 👋

[Mat Jackson 1975]

I remember buying g a set of Seats off David 15 years ago for my first car.  Brilliant guy to deal with!!!

[SteveB21]

More car p**n - finally decided to treat myself to some satin black 13” CXRs. Good service from R&R Alloys. Now I just need to get the tyres…

[Flying Carrot Steve]

4 hours ago, SteveB21 said:

More car p**n - finally decided to treat myself to some satin black 13” CXRs. Good service from R&R Alloys. Now I just need to get the tyres…

 

 

They are VERY sexy!

[Matt_S]

Never regretted buying my 13” CXR’s! I love them despite the limited tyre choice.

 

I would suggest before you fit the tyres is get them ceramic coated, I used Gtechniq C5 wheel armour and the water still beads off of them 👍🏼

 

[SteveB21]

@Matt_S thanks for the recommendation - did you do all the prep GTechniq recommend or just make sure the wheels were clean and dust free?

[Tim (Sideways) Johnson - Club Treasurer]

Soft bits half hood and storm cap courtesy of Ben Robson. Just need to sort out some Velcro for the hood and we’re good ☔️

[Tim (Sideways) Johnson - Club Treasurer]

Also a Quad Lock mount for my phone that I’ve made a bracket for and mounted using the tonneau poppers. My suction mount didn’t like having the heater vent blowing on it, so kept falling off. Hopefully this one will remedy that.

[Dave Eastwood (Gadgetman)]

2 hours ago, SteveB21 said:

@Matt_S thanks for the recommendation - did you do all the prep GTechniq recommend or just make sure the wheels were clean and dust free?

I've used it, and to get good lasting protection, found you do need to do the full prep. However, with the full prep, I also found GTechniq's claims for the longevity of the coating, very, very conservative. Though admitedly, post most washes, I do give them a final light spray over with GTechniq's C2V3, before polishing off with a microfibre cloth. (This doesn't affect the ceramic coating beneath, but helps keep peak water beading, and helps stops the dust/dirt sticking)

[Matt_S]

2 hours ago, SteveB21 said:

@Matt_S thanks for the recommendation - did you do all the prep GTechniq recommend or just make sure the wheels were clean and dust free?

Yes, followed there instruction and used another product, not sure which one it was now, I think it was panel wipe but I can check when I get home 👍🏼

[Flying Carrot Steve]

2 hours ago, SteveB21 said:

@Matt_S thanks for the recommendation - did you do all the prep GTechniq recommend or just make sure the wheels were clean and dust free?

 

I used it to do my Jag wheels about 3 years ago. I decided to double ceramic coat them, took me days doing it all properly. Mostly letting it properly set between coats, making sure they were spotlessly clean etc. Was worth it though. 

 

 

 

 

 

[Dave Eastwood (Gadgetman)]

3 hours ago, Matt_S said:

Yes, followed there instruction and used another product, not sure which one it was now, I think it was panel wipe but I can check when I get home 👍🏼

Yep, clean normally first to get them spotless, then GT Panel Wipe to clean off any previous treatment residues, (which includes factory stuff, from when the were made).