Carbon indicator pods

[Rednop1]

Carbon indicator pods (Pair)

 

Again like all my products these a made from high quality Prepreg carbon and are baked at 120°c making them strong light and really high quality

 

These are £95 and i will include uk postage for wscc club members 

[Hadz]

Hi @Rednop1

 

Have sent yoy a message for a set. 

 

Thanks. 

[djm]

Can anyone advise me if these were fitted to my new build Mazda SDV would it pass IVA? So that I can avoid holes in the nosecone if upgraded after IVA.

 

[Ian Kinder (Bagpuss) - Joint Peak District AO]

Unlikely as they don't meet the viewing angle requirements as per the IVA manual. I 'borrowed' a nose cone for IVA to avoid drilling my new nose.

[Kingster]

But don’t Caterham have their indicators in the same location? Pretty sure someone on here passed IVA with this type of indicator but it did require some fudging to get through. 

[BenD]

i passed iva with a set of indicator pods fitted on my mazda sdv with no issues at derby. he asked me where i got them from i said westfield. i suppose its just down to the discretion of the tester on the day but it was some years ago. also mk use an indicator setup on there cars in the same position but different design

[Dave Eastwood (Gadgetman)]

4 hours ago, Kingster said:

But don’t Caterham have their indicators in the same location? Pretty sure someone on here passed IVA with this type of indicator but it did require some fudging to get through. 

They are, or were effectively higher up than on a Westfield, so not as masked by the front wheels.

[djm]

Thanks everyone for your knowledge I will have to make a decision about what to go for when I get to that stage of my build.

[Ian Kinder (Bagpuss) - Joint Peak District AO]

45 minutes ago, djm said:

Thanks everyone for your knowledge I will have to make a decision about what to go for when I get to that stage of my build.

Aim to pass the IVA and not 'wing it'. It would be a shame to fail on such a simple/avoidable item.

 

If with modifications, you can demonstrate they meet the viewing angles, you should be fine. 

 

My tester commented at the start that he likes testing Westfields as if you build them to the manual with the factory provided items they generally pass.