DMc Posted December 16, 2019 Share Posted December 16, 2019 Hi all. im after a big brake kit or part of a kit for westfield/cortina hubs ideally 260mm discs upwards (hispec/wilwood/AP etc) and ideally fit under 13's thanks Link to comment Share on other sites More sharing options...
Ian Kinder (Bagpuss) - Joint Peak District AO Posted December 16, 2019 Share Posted December 16, 2019 @Rednop1 have you got some to offer? Link to comment Share on other sites More sharing options...
Hawkemotorsport Posted December 20, 2019 Share Posted December 20, 2019 Not sure if you have this sorted but we can get hold of the HiSpec kit with 260mm 1p discs or 275mm 2p discs (floating), Both are designed for use with a min wheel size of 13". The 260mm option uses single piece 260mm x 20mm discs and the Billet 4 Hispec Caliper and the 275mm uses 2 piece floating discs with a 26mm thickness and uses the RS114 Hispec Caliper. The floating option is quite a bit more money though. If you want to make sure of the fitment we can supply a template you can use to check clearances etc. If you are interested let me know. 1 Link to comment Share on other sites More sharing options...
AndySheldon Posted January 12, 2020 Share Posted January 12, 2020 I have a set of discs pads amd calipers for sale. New and unused. Hi-spec....... Let me know if interested. Link to comment Share on other sites More sharing options...
DMc Posted January 14, 2020 Author Share Posted January 14, 2020 @AndySheldon I’ve sent you a pm @Hawkemotorsport apologies, I’ve just seen your reply. could you pm me prices for both kits please 1 Link to comment Share on other sites More sharing options...
Hawkemotorsport Posted January 14, 2020 Share Posted January 14, 2020 4 hours ago, DMc said: @AndySheldon I’ve sent you a pm @Hawkemotorsport apologies, I’ve just seen your reply. could you pm me prices for both kits please No Problems The HiSpec kit with 260mm Single piece discs with Billet 4 Calipers is £455 for the Anodised kit or £495 for the powdercoated option The HiSpec kit with 275mm Floating two piece discs with RS114 Calipers is £960 is Anodised only (no Powdercoat option). Neither kit includes pads or lines. If you need any templates to double check clearances then please let me know. Link to comment Share on other sites More sharing options...
DMc Posted January 14, 2020 Author Share Posted January 14, 2020 Thanks @Hawkemotorsport the templates would be ideal as I have 2 different sets of wheels the need to fit under 1 Link to comment Share on other sites More sharing options...
Hawkemotorsport Posted January 15, 2020 Share Posted January 15, 2020 21 hours ago, DMc said: Thanks @Hawkemotorsport the templates would be ideal as I have 2 different sets of wheels the need to fit under Just wating for Hispec to send to me. Please see attached. IIRC the Escort 2 is the same as the Cortina hubs. Ford escort 2 - 260x20 - B4.pdf Ford escort 2 - 275x26 - RS114.pdf Link to comment Share on other sites More sharing options...
DMc Posted January 16, 2020 Author Share Posted January 16, 2020 19 hours ago, Hawkemotorsport said: Just wating for Hispec to send to me. Please see attached. IIRC the Escort 2 is the same as the Cortina hubs. Ford escort 2 - 260x20 - B4.pdf 13.87 kB · 2 downloads Ford escort 2 - 275x26 - RS114.pdf 10.75 kB · 2 downloads Thanks for that. is there a choice in piston diameter also? id be looking for close to 34mm Link to comment Share on other sites More sharing options...
Hawkemotorsport Posted January 16, 2020 Share Posted January 16, 2020 5 hours ago, DMc said: Thanks for that. is there a choice in piston diameter also? id be looking for close to 34mm No piston option on the Billet 4 calipers but on the RS114 you have 34/41mm piston or the option for 38mm Hispec recommend the 34/41mm Link to comment Share on other sites More sharing options...
DMc Posted February 20, 2020 Author Share Posted February 20, 2020 Brakes have been sourced, thanks Link to comment Share on other sites More sharing options...
Kingster Posted February 20, 2020 Share Posted February 20, 2020 I know you have put “please delete” on - but there’s some really useful info on here, so can we leave the thread up and just change the title to “now sourced” instead 👍 People searching for info could find it. Link to comment Share on other sites More sharing options...
DMc Posted February 20, 2020 Author Share Posted February 20, 2020 Done 👍 1 Link to comment Share on other sites More sharing options...
dhutch Posted February 20, 2020 Share Posted February 20, 2020 Good work. Link to comment Share on other sites More sharing options...
Recommended Posts