GiZmO1269 Posted July 31, 2018 Share Posted July 31, 2018 *Car now Sold* Hi all - Thanks for looking 1997 Westfield SEiW 230BHP black top Zetec Owned for 10 years. Needs TLC after long time of not much use. Just got it back from an engine and fuel line flush and running as well as the day we got it. Genuine Westfield Nose and wing ready to replace damaged (still boxed). Car could do with a respray if to be used on the road. Looking for £5500 – open to offers. Mobile: 07758944196 Chassis Westfield, IRS, widebody, Fully powder coate by factory. RAC spec roll over bar with detachable rear stays. FIA foam padding for RAC roll bar. CAT motorsport wide track front wishbones. CAT motorsport Aluminium hubs. Poly brushed at front. Front anti-rollbar by Terry Nightingale Adjustable front shocks with 2.5" springs Adjustable rear shocks with 1.9" springs Quick Rack with modified steering arms. Bodywork Plays-Kool Motorsport front carbon cycle wings Plays-Kool GRP race seats in black Black Boot box Plays-Kool motorsport dash Reverie seat cushions. Wheels 4 x TSW Evo alloys,black Fitted with Toyota R888 195/50VR15 tyres Engine Fors 2.0 16v Zetec worked on by Rick Wood Engineering, 227.8 bhp. 172ft.lb Torgue Ric Wood CNC Type R head Jenvey 45 Throttle Bodies Ported Dunnell race inlet manifold Dunnell shortend baffled race sump, with modified pickup Dunnell alternator mount Dunnell lightweight flywheel and heavy duty clutch plate/cover Lucas Starter motor Braided Earls hoses Tony Law 4-2-1 down pipes and collector Oil catch tank with pipercross breather MSD competion ignition leads and coil pack Ric Wood high performance cams Transmission Ford BGH made type 9,5 speed gearbox. Fitted April 2005 Ratios 1st 2.75 2nd 1.75 3rd 1.26 4th 1.0 5th 0.84 ford 3.92 diff with viscous LSD Westfield supplied propshaft Brakes CAT Motorsport 4 pot alloy calipers at front STD westfield at rear Fluke Motorsport lightenend drilled discs EBC Greenstuff pads all round Floor mounted pedals and clutch footrest in transmission tunnel Electrics Std Westfield wiring loom DTA 3d management Push Button start SPA design rev counter and speedometer Spa design oil presure and water temp guage Westfield Electronic fuel gauge Usual switches for lights etc Sabelt 3" shoulder and 2" lap with aircraft style release(Dec 2004) Other Alloy Radiator New Front Grill Westfield supplied fuel tank with dry breather Facet redtop fuel pump Facet King filter Momo quick release steering whee, SPA boss Westfield side screens with elbow room Carbon fibre rear light clusters Small black M & P headlights Boot box cover 3 piece weather cover Link to comment Share on other sites More sharing options...
GiZmO1269 Posted August 1, 2018 Author Share Posted August 1, 2018 Hi All To answer a few questions. The car has been off the road for about 6 years, it will need a few things doing to pass its MOT. For example, the indicators don't currently work. The indicators are operated from the quick release steering wheel. a replacement socket is required on the dash where the cable plugs in. The reverse light works but lens is broke, so that will require replacing. Small things like that. The full windscreen was removed after taking off the road, so not sure how current setup with aeroscreen affects MOT. There is also a spare bonnet and the windscreen that came off the car We are in Gainsborough, Lincolnshire I've had a lot of interest in very short amount of time. If you are interested, I would encourage you to come and view the car before making an offer. That way there are no disappointments. We will be taking final offers on Tuesday the 7th to give enough time for people to see adverts and view. Thanks Phil Link to comment Share on other sites More sharing options...
Recommended Posts