Jump to content

Recommended Posts

Posted

Just playing around with my dash setup, and noticed that the horn works all the time, regardless of the position of the ignition key.

Following things throughIi have sort of worked out that :-

  a) PURPLE is live 12+ all the time, seen on the Aux Plug and the Horn - PURPLE all the way back to the fuse block

  b) GREEN is switched 12+, from the Ignition key

  c) BLACK is common GROUND

 

Just checking I've got things straight?

I'm surprised the horn is operational all the time, was expecting it to be switched.

On the same subject I'm assuming on my Sport250 start button, this would only be illuminated with the lights, as its quite a bright RED?

Posted
10 minutes ago, BugMan said:

Just playing around with my dash setup, and noticed that the horn works all the time, regardless of the position of the ignition key.

Following things throughIi have sort of worked out that :-

  a) PURPLE is live 12+ all the time, seen on the Aux Plug and the Horn - PURPLE all the way back to the fuse block

  b) GREEN is switched 12+, from the Ignition key

  c) BLACK is common GROUND

 

Hi Bugman, I can confirm the above. your hazards and side lights should work without ignition too. See fuse feed B5 on the attached.

 

Can't comment on the Sport250 button without sight of a diagram, sorry. Ian

4833 Chassis Harness.pdf

Posted

Thanks bud, just checking so i don't screw up.

Posted

Mines not an illuminated switch! But I Believe the illumination of the start switch should come from an orange wire, as per the rest of the switches (apart from the fog!).

Posted

 

Have you got the wiring diagram I put in members section? Will tell you what colours are what. Much better than the newer diagrams. 

 

Posted
2 hours ago, AdgeC said:

Mines not an illuminated switch! But I Believe the illumination of the start switch should come from an orange wire, as per the rest of the switches (apart from the fog!).

It’s red/orange :yes:

  • Like 1
Posted
10 hours ago, Chris King - Webmaster and Joint North East AO said:

It’s red/orange :yes:

Thanks Chris, my memory's hazy at the best of times! Not used to checking docs/drgs. for WF details :d

Posted
2 hours ago, AdgeC said:

Thanks Chris, my memory's hazy at the best of times! Not used to checking docs/drgs. for WF details :d

Haha sorry had my “pedant” hat on :d

Just saw these wires so often as I stripped my loom back to replace the old gauges and switches!

  • Haha 1
Posted
1 minute ago, Chris King - Webmaster and Joint North East AO said:

Haha sorry had my “pedant” hat on :d

Just saw these wires so often as I stripped my loom back to replace the old gauges and switches!

Yep, you start seeing dash illumination wires in your sleep after a while doing that job; there's just so many of them!

  • Haha 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.