Andrew Posted November 3, 2017 Posted November 3, 2017 29 minutes ago, RussH said: I'm now officially excited! Is the cafe any good? I think the café will probably be dry! Quote
Howsafe Workwear and Safety Equipment Posted November 3, 2017 Author Posted November 3, 2017 weathers moving forwards a bit - now says rain until 12pm anyway bikini and gimp suit packed Quote
Howsafe Workwear and Safety Equipment Posted November 3, 2017 Author Posted November 3, 2017 that Majorca Russ? Quote
Deanspoors Posted November 3, 2017 Posted November 3, 2017 Well, my supercharger crank pulley bolt has snapped and obliterated everything near it so won’t be going to Cadwell unfortunately.. if someone wants my trackday let me know, should be able to arrange a change of name. Not looking for any money for it, unless you want to donate something to the cost of parts I’m going to need :’( Dean Quote
TAFKARM Posted November 3, 2017 Posted November 3, 2017 Gutted Dean I was looking forward to seeing the beast go. As for the place... @chris parkin ....? Quote
Andrew Posted November 3, 2017 Posted November 3, 2017 38 minutes ago, Deanspoors said: Well, my supercharger crank pulley bolt has snapped and obliterated everything near it so won’t be going to Cadwell unfortunately.. if someone wants my trackday let me know, should be able to arrange a change of name. Not looking for any money for it, unless you want to donate something to the cost of parts I’m going to need :’( Dean Rotten luck Dean. I too was looking forward to seeing your car. Quote
Andy (Sycho) Posted November 3, 2017 Posted November 3, 2017 Yes also sorry to hear that I was also looking forward to see how it went. Quote
Deanspoors Posted November 3, 2017 Posted November 3, 2017 Managed to get the remaining piece of the bolt out, but no spares so unfortunately after a mad rush to remap the car and replace a leaky oil seal it’s a no go. Quote
BenD Posted November 3, 2017 Posted November 3, 2017 Do you know what bolt it is @Deanspoors I have hundreds I work in a toolroom Quote
Deanspoors Posted November 3, 2017 Posted November 3, 2017 its a 3/8" x 2 1/2 unf 12.9, I've just ordered a replacement one of eBay, a bit unsure of how its snapped to be honest, it only holds the pullet on tight, but the pulley itself has a bearing carrier so there should be little radial load. Quote
BenD Posted November 3, 2017 Posted November 3, 2017 I have a bag of random unf pins in the garage does it need to be a cap screw or could you get away with a hex head for the time being Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.