All Activity

Could try in the 3D printing section. Good little project for someone. I'm new to it so don't have the skill to draw honey comb yet.

Located in Hailsham - 07869473434 MK1 Ford Focus for sale. 1.6 Zetec engine, new spark plugs, oil, filters. It was kept as a spare car however I don't have space now. It needs a front spring and wheel bearing to pass an MOT. Chassis is solid, been advised it's a solid car with no body or chassis issues. The interior is good for its age, no major damage. I've given it a clean since the photos so it's a little fresher. The exterior has an odd coloured wing mirror cap, a small mark on the bumper and the corner is popped out, and the tailgate has a small rust patch where water has sat on the window lip. Otherwise it's good and as expected for a car of its age with only general paint marks. I need to clear some space. Recently had a new grill, front fog and rear fog light fitted. I can get more pictures soon! Collection from Hailsham area. If you're at all interested please drop me a message, I'm always happy to help and need the driveway back!

When I purchased my Westfield I thought it was going to be living outside so I purchased this Stormforce Outdoor car cover, but then I found it fitted in my garage. This is brand new and has never been out of the case. It has been stored inside in the plastic bag. These retail at £200. The part number is CCC578. I’ll sell this for a bargain of £130 collected or £135 posted.

Hi Chris I would like them I will pm you Thanks Jem

Brand new nd never fitted. Billet water pump pulley RRP £66. yours for £40 which includes postage no fees. Below is the item details. Zetec Engine Alloy Water Pump Pulley - Billet Aluminium Anodized Black Finish For use with the Ford Zetec engine Pulley diameter increased by approx 20% for reduced pump RPM CNC machined billet 6082 T6 grade Aluminium - less rotating mass and more balanced compared to standard steel pulley Anodized black finish Excessive RPM can cause fluid cavitation at the pump impeller, this can cause a number of issues: Decreased flow Excessive vibration – leading to premature seal/bearing failure Damage to the pump impeller blades Damage to pump housing

If you dont find anything westfield, nova racing do a box that is is similar

Hi. Does anyone have some Gates Barricade fuel hose leftover or to sell? I really need to replace my fuel lines. I think I require 27348 type for the westfield. Thanks.

Not my picture but same thing Brand new.. Never used in box. Cost me £1100 from MK Sports cars booooooo hisss Suits hayabusa engine of any type not sure on gen 3 not seen one. Has button shift up and down Can easily buy paddles as an upgrade instead of the buttons. Reason for sale.. Just fancied keeping the shift lever.. You can use both if I remember rightly. The one for sale in the link is 980+delivery.. I think £800 is a steal. Air shifters are better but you're looking at well over £2500 upwards

No longer needed. A pair of wind deflectors, purchased from eBay for £145 but only used on the car twice. Could do with a light polish but have no deep scratches. Comes with the pins ready to slide into the standard screen hinges. Pictures show the actual items. £85 which includes postage and PayPal fees. SOLD

Similar to this or narrower. I need to expel hot air under V8 style engine cover a bit better. Suffered heat soak last summer after lonnnng hot days driving hard then hitting crawling traffic.. So removing said trapped air will help

Looking for a ZK Ducted Nose Cone. I understand the size can be a pain for shipping so the further south its located the better.

Hello, looking for a working reverse box in good shape.

I got my spacer bushings made by a local machinist. So then one can choose proper height (different as different is position od harness holes in different seats, runners or no runners under seat, lowered floor or not etc. Worth to make it that lenghtm so harness is not in contact with opening in seat or at least smallest angle possible. Eye bolts are in different lenghts so no problem . It’s an easy job for them (lathe operator) , and you can pick stainless or regular steel. I also went a bit thicker than the ones I see in the photos here, just to be on the safe side.

Hi Rob see photos below the roof needs a good clean bit is in good condition no rips, likewise the doors, also pictured the support frame for the roof.

I love the eBay description: “No Suspension or Chassis Damage. The damage is only to the high level bar on the entry area of the passenger side” Is that not the chassis?

My nephew did something similar to his Caterham and it was anything but an easy fix, not least because of getting a chassis of the correct vintage with the correct fittings was challenge to say the least. It wasn't cheap, either.

I would like too see it repaired for a grand How much is a cat silencer from westfield these days £900ish ?

Will need to store it for another 10 years for that option

Ahh, TVR Glen! The tales I could tell you about him and this operation... if I weren't on a public forum and those comments would unnecessarily land me and the club in a courtroom... Allow me to say something that I can say without that happening: MANY OTHER PLACES TO BUY A WESTFIELD ARE AVAILABLE - SEARCH THEM FIRST BEFORE YOU BUY

i did see this advertisement on facebook as it this company has lot of cool but damaged cars in stock. They said they could repair it for £950.00 too.

KX19DZU The registration of my damaged and written off car in bold, so hopefully no one is caught out. I've just been made aware that the car is currently being advertised on FB and Ebay as an Easy Easy Fix! I drove the car home after the accident and the steering wheel was out by a good 45°. It also drove strangely as if it was crabbing a bit. There was damage to the N/S floor, transmission tunnel, scuttle panel and dash support bar. As well as the point of impact at the N/S doorway. I believe the chassis to be damaged and bent. Whilst I'm sure it is repairable, I think the quoted damage has been underestimated. It's is good though, that they are offering to Mot it for you. Again hopefully no unsuspecting person is caught out. https://ebay.us/m/wpcykc

Thanks, please let me know. I might also be interested in the doors as well. Mine is a wide body so I think the doors would fit.

I’m not sure if they are the same for all but I’ve got a roof for a narrow body, I think I’ve got a set of doors as well I’d just need to double check as they are in storage

The wireless headsets are available fairly cheaply now, moman is a brand iv had that did not break the bank, added bonus of when in the car on your own you can have music for yourself too! No wires either but more fiddly to set up.than a wired one

I bought off eBay for £11.50 to give it a go when take my daughter out in car. Hard to hear her with helmets on. she only with every so often. For price it’s worth a go. I didn’t want to splash out on wireless set. As she’s not out with all the time. I love the Retro packaging.