adam1330 Posted December 27, 2012 Share Posted December 27, 2012 MBE 956 ECU & Loom for sale. purchased this from a member on here when I thought I was having problems with the loom in my car, in the end it turned out to be something much simpler, so I never had to use this. The loom came off a Zetec(Silvertop I believe), although apparently the connectors were different on my Blacktop, so double check the connections you need, or be prepared to swap them if need be. Although I never ended up fitting it, I did change the map on the ECU to the one for my car, so the map is for a 2ltr standard Blacktop with Jenveys/Raceline exhaust system with no CAT, as mapped by Northampton Motorsport. I paid £150, so just looking to make my money back. There is 1 of these connectors: 2 of these: and 4 of these: Wire marked Main Harness has been cut: and wire marked Coil has had a spliced wire cut: and finally, wire marked Water temp has no connector on it as well, didn't take a photo of this as it just ends in cut wire! Link to comment Share on other sites More sharing options...
Geoff101 Posted December 27, 2012 Share Posted December 27, 2012 Pm on the way Link to comment Share on other sites More sharing options...
adam1330 Posted December 27, 2012 Author Share Posted December 27, 2012 Sold! Link to comment Share on other sites More sharing options...
CL290005 Posted December 27, 2012 Share Posted December 27, 2012 Geoff You will be asking for my throttle bodies next ! Link to comment Share on other sites More sharing options...
Geoff101 Posted December 27, 2012 Share Posted December 27, 2012 Not for me sadly Chris - for my mate building the Haynes Roadster. Link to comment Share on other sites More sharing options...
CL290005 Posted December 28, 2012 Share Posted December 28, 2012 I thought you were still collecting items for your silvertop conversion Link to comment Share on other sites More sharing options...
Recommended Posts