Paul Morcom Posted April 23, 2012 Share Posted April 23, 2012 240bhp Vauxhall 2.0 VX XE (C20XE) - Sold (Spec:Twin 45 Webers, SBD Exhaust, MBE ECU and Accusump) Used in the Westfield Speed Series and maintained fully with no expense spared. 14 events in 2010 and 12 events in 2011. Totally reliable and very useable power and torque. A very competitive package for motorsports but at the same time an exceptionally useable engine for road use (this is not an ‘extreme’ motorsport spec engine but very fast with a good spread of power and torque). Engine work completed by Stanwood Performance Engines. Carbs balanced and setup by Chatsworth Motor Spares (Weber specialists for 30 years+). Engine done approx 1000 miles since complete rebuild. The MBE ECU has been fully mapped on a rolling road for this engine and exhaust system; so this is basically everything you need to drop into your car and go without any expensive rolling road and tuning costs. Engine specification: • Twin Webber 45's • Highly developed polished and ported head (refreshed in 2011) • Farndon steel rods • Accralite forged pistons • ARP's • ACL bearings • New oil and water pump, timing belt kit and alternator Engine sale also includes: • Moroso accusump with electronic valve • MBE ECU and wiring harness • SBD high level 4-1 exhaust manifold with SBD stainless can (repacked) and carbon cover Vauxhall 2.0 XE SBD Dry Sump kit - Sold Full SBD Dry Sump kit for 2.0 16v Vauxhall, PACE pump, PACE lowline sump, steel braided hoses, jic connectors and SBD Alloy tank (new is over £1800) Ford Type E (Rocket) 4spd SCCR TranX - £500 Straight cut, close Ratio, Gearbox with 2.04 long ratio 1st . Set of Jenvey 45mm throttle bodies plus Omex 600 (mapped for above engine) and Harness - Sold Cost new well over £2000 with rolling road & mapping. Priced to sell to a Westfield owner; if no interest will go on Pistonheads where this lot will sell for more than the asking price. Buyers to collect or to arrange a courier. Open to offer if buyer takes all. Please PM me if interested. Link to comment Share on other sites More sharing options...
Paul Morcom Posted April 27, 2012 Author Share Posted April 27, 2012 Jenveys, Omex and harness sold. Link to comment Share on other sites More sharing options...
Paul Morcom Posted April 30, 2012 Author Share Posted April 30, 2012 Open to sensible offers before I advertise elsewhere. Link to comment Share on other sites More sharing options...
Paul Morcom Posted May 8, 2012 Author Share Posted May 8, 2012 Final week before this lot is advertised elsewhere. Open to very sensible offers. For a serious offer on the engine only I would split the engine from webers, ECU, exhaust system and accusump. Link to comment Share on other sites More sharing options...
Rory's Dad Posted May 9, 2012 Share Posted May 9, 2012 How much for the accusump and all its bits please?? Rory's Dad Link to comment Share on other sites More sharing options...
Paul Morcom Posted May 9, 2012 Author Share Posted May 9, 2012 PM sent to Rory's Dad. Link to comment Share on other sites More sharing options...
Paul Morcom Posted May 15, 2012 Author Share Posted May 15, 2012 Nobody interested? - cost well over 3 times this to build. I think it's a bargain but I may be on my own with this thought. Link to comment Share on other sites More sharing options...
Paul Morcom Posted June 11, 2012 Author Share Posted June 11, 2012 Engine and Dry Sump now sold. Link to comment Share on other sites More sharing options...
Rory's Dad Posted June 12, 2012 Share Posted June 12, 2012 Did the Accusump go too? Rory's Dad Link to comment Share on other sites More sharing options...
Recommended Posts