frag68 Posted January 27, 2012 Posted January 27, 2012 Matt, You were correct about mine. Nice and simple and no ECU to worry about. Fraser Quote
Matta Posted January 27, 2012 Author Posted January 27, 2012 I might me interested in this, don't know what can be done with mine O/T does anybody know a good place to have my geometry done? If it's just the wheel alignment and camber at the front once you've done your wishbones, I can show you what to do. I have some DIY guages that work well enough to get it useable. All you need is a fairly flat floor to work on. Get in touch if you want to give it a try. Matt Quote
ziplob Posted January 28, 2012 Posted January 28, 2012 will come along for a look matt would you not be better spending your hard cash on a fuel pump or a roll cage ?? Quote
Rab (bombero) Reid Posted January 28, 2012 Posted January 28, 2012 Folks - can those of you who have expressed an interest in this give me your engine spec & ECU details (if you have one - an ECU that is, not an engine!). I'll then speak to SiTech and make sure they can accomodate everyone's cars before looking at dates. So far (from memory) I have: GreigM - Megabusa/Powercommander Bombero - 2.0ltr Zetec / Emerald K6U Nicks100 - ? Frag68 - Pinto/? Jumpy - ST170/? Doug D - Zetec/? MattA - Duratec / Omex600 Cheers, Matt That's me confirmed my spec. Quote
Doug Dastardly Posted January 29, 2012 Posted January 29, 2012 I'm a 2.0 Zetec with omex 600, but it will of course depend on when the day is and if I'm on the road and run in. Doug Quote
Rab (bombero) Reid Posted January 29, 2012 Posted January 29, 2012 Folks - can those of you who have expressed an interest in this give me your engine spec & ECU details (if you have one - an ECU that is, not an engine!). I'll then speak to SiTech and make sure they can accomodate everyone's cars before looking at dates. So far (from memory) I have: GreigM - Megabusa/Powercommander Bombero - 2.0ltr Zetec / Emerald K6U Nicks100 - ? Frag68 - Pinto/? Jumpy - ST170/? Doug D - 2.0ltr Zetec / Omex600 MattA - Duratec / Omex600 Cheers, Matt Quote
Jumpy07 Posted January 29, 2012 Posted January 29, 2012 Mine is ST170 with Jenvey TB's and Emerald ECU running Wide Band Lambda in adaptive mapping mode Craig Quote
Nicks100 Posted January 30, 2012 Posted January 30, 2012 My engine and ECU :- Rover 4.6 EFI with 14CUX and fuel map from racing TVR. Quote
Rab (bombero) Reid Posted January 30, 2012 Posted January 30, 2012 Folks - can those of you who have expressed an interest in this give me your engine spec & ECU details (if you have one - an ECU that is, not an engine!). I'll then speak to SiTech and make sure they can accomodate everyone's cars before looking at dates. So far (from memory) I have: GreigM - Megabusa / PowerCommander Bombero - 2.0ltr Zetec / Emerald K6U Nicks100 - Rover 4.6 / 14CUX Frag68 - Pinto/? Jumpy - ST170 / Emerald Doug D - 2.0ltr Zetec / Omex600 MattA - Duratec / Omex600 Cheers, Matt Quote
Matta Posted January 30, 2012 Author Posted January 30, 2012 Ta Folks. I'll contact Simon and get some potential dates. Matt Quote
Matta Posted January 30, 2012 Author Posted January 30, 2012 Ta Folks. I'll contact Simon and get some potential dates. Matt Ok, spoke to Simon and he needs about 3 weeks notice to clear a day - he'll do either Saturday or Sunday. I've said we'd want a weekend and not before May (to make sure no one's car is still on SORN, or, in Doug's case, not finished). He's fine with the car specs advised so far. Price per car will be £45 for less than 12 cars, or £35 for more than 12. Either power runs or diagnostic. Two runs per car, plus printout. He'll supply BBQ & tea urn and I'll supply the burgers etc. I'll check the dates we already have in the diary with wee dov but do folks have any preferences (or weekends/dates to avoid). My thoughts would be fairly soon after Easter and before 'the big one' to Applecross, to hopefully help folks get cars fettled for the summer but suggestions are welcome. Just a reminder, SiTech are based in Rosyth Business Park, just along from the Forth bridge. Cheers, Matt Quote
Jumpy07 Posted January 30, 2012 Posted January 30, 2012 Matt, just for interest do you know if its a 4 wheel dyno or two ?... got a friend with a 4x4 Cossie thats looking for a local dyno operator Thanks Craig Quote
Matta Posted January 30, 2012 Author Posted January 30, 2012 Matt, just for interest do you know if its a 4 wheel dyno or two ?... got a friend with a 4x4 Cossie thats looking for a local dyno operator Thanks Craig Hi Craig - It's a 2 wheel. Cheers, Matt Quote
kev91 Posted January 30, 2012 Posted January 30, 2012 If it's just the wheel alignment and camber at the front once you've done your wishbones, I can show you what to do. I have some DIY guages that work well enough to get it useable. All you need is a fairly flat floor to work on. Get in touch if you want to give it a try. Matt Thanks very much for the offer on that. I may take you up on it. I shall come along to the R-R and may even have a power run done. Does anybody have a list of the confirmed dates we set? Kev Quote
Rab (bombero) Reid Posted January 30, 2012 Posted January 30, 2012 Can I suggest to those wishing to just pop along on the day first, before deciding if they're going on the dyno to still let Matt know your engine/ecu spec, simply to give Simon the heads up in advance of the day. Also everyone, let's see if we can boost (pun) the numbers to get (a) a good deal on the day and (b) the more the merrier at the BBQ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.