JamesD Posted October 16, 2002 Share Posted October 16, 2002 Have had to dismantle my rear suspension as the wheel bearing decided to fall apart when I inserted the outer hub. On reassembly I followed the build manual, but noted that on the bottom wishbone fixing to the upright (NOT the rose joint side), there was no mention of a washer between the upright and the bottom wishbone arm. Is this the case...does the upright mate right against the edge of the bush without a washer? If someone could remember how they set their's up I would be most grateful for the info. Regards, JD Quote Link to comment Share on other sites More sharing options...
steppenwolf Posted October 16, 2002 Share Posted October 16, 2002 I have a washer between the upright and the wishbone. This should be there to stop the wishbone 'eating away' at the aluminium casting of the upright! Quote Link to comment Share on other sites More sharing options...
JamesD Posted October 17, 2002 Author Share Posted October 17, 2002 as I thought should be the case... cheers steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.