AndyM Posted September 5, 2002 Share Posted September 5, 2002 Trying to set up the VDO speedo for the first time and enter the pulse reading. Following the formula in the manual I get the same result they do i.e 5073. Which should be entered on the pulse reading as 005073 (according to the manual) But... The speedo does not allow you to set the right-most digit, it's always 0 . So should I set it up as: 005070 or 050730 or am I missing the point Quote Link to comment Share on other sites More sharing options...
hilux Posted September 5, 2002 Share Posted September 5, 2002 I dunno, I asked the same question and got two answers. My first attempt (on advice) was 5030 and the speedo read up to 40. My second attempt (on advice was some 25340 ish ?) and now the speedo reads up to 10 mph. Help!! Quote Link to comment Share on other sites More sharing options...
steppenwolf Posted September 5, 2002 Share Posted September 5, 2002 Set the pulse to 005070 as this is in the right ballpark. If you have 15" wheels and 205 x 50 tyres then 005400 is what you need. This all assumes that you are reading the pulses from the lobro joint bolts! Quote Link to comment Share on other sites More sharing options...
Bananaman Posted September 5, 2002 Share Posted September 5, 2002 Just done this, i rounded the last diget to the nearest 0, this appears to have worked! Quote Link to comment Share on other sites More sharing options...
Bananaman Posted September 5, 2002 Share Posted September 5, 2002 Just done this, i rounded the last digit to the nearest 0, this appears to have worked! Quote Link to comment Share on other sites More sharing options...
Bob Green Posted September 6, 2002 Share Posted September 6, 2002 Hi Andy I'm p****d right now but I do have a spread sheet that gives you the numbers; bl**** Jack Daniels. Give me your e-mail and I will send it on to you. Kind regards Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.