leomurray Posted March 25, 2009 Share Posted March 25, 2009 Hi, I'm busy neatening up my loom and pulling wires. I've asked this on the fmwestfield forum, but still not sure. Any UK builders out there know if i can remove this heat sink thingy? it's on the left side of the car close to the loom that goes to the left headlight, amd is apparently part of the 'daytime running lights' Quote Link to comment Share on other sites More sharing options...
Mark (smokey mow) Posted March 25, 2009 Share Posted March 25, 2009 Hummm, I haven't got one of them on mine If you can let me know what the colours of the wires are, the age of the donor and whether it's a 1.6 or 1.8 and I'll check my folder of MX5 electrical diagrams and see if the whole thing can be removed and the wires pulled to save some weight. Edit to add you may find this site useful for wiring diagrams. Quote Link to comment Share on other sites More sharing options...
Gazhank Posted March 26, 2009 Share Posted March 26, 2009 Ours is a 1.8 1994 and we never re fitted this part. Car was completed in November and over 500 miles later no problems. Gary Quote Link to comment Share on other sites More sharing options...
leomurray Posted March 26, 2009 Author Share Posted March 26, 2009 Thanks for.the input chaps. I'll get the wire colours this evening. Gary, did you remove the whole 'sub system' wires and all? or did you have to connect the two wires together, to complete the circuit? Quote Link to comment Share on other sites More sharing options...
Gazhank Posted March 26, 2009 Share Posted March 26, 2009 Leo We had already fitted that part of the loom to the car through the scuttle before we realised we didn't need it. So the wiring is still on the car just not plugged into the heat sink thingy, which I believe is for the motors on the pop up headlights. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.