chrisinoxford Posted May 29, 2007 Share Posted May 29, 2007 Guys. Anyone know how to join the throttles on each carb, is there a linkage bar i can buy? not sure how they are setup, any ideas. thanks. chris Quote Link to comment Share on other sites More sharing options...
westy666 Posted May 29, 2007 Share Posted May 29, 2007 Burtons have a pretty good selection. burtonpower.com/fuel system/carb linkage kits There's a 'lever' and 'balance linkage' required to connect the one pair to the other. Did you buy these carbs as a pair or seperately? ... Quote Link to comment Share on other sites More sharing options...
chrisinoxford Posted May 29, 2007 Author Share Posted May 29, 2007 westy i got them new off ebay in seperate boxes. so only go two single 45's chris. Quote Link to comment Share on other sites More sharing options...
melt Posted May 29, 2007 Share Posted May 29, 2007 Speak to Anthony at Fast Road Car , very helpful and I am sure he can sort it out for you. If you look under "Weber linkages and parts" I think the parts you need are there (may need a few special washers and tabs etc.). HTH Mel Quote Link to comment Share on other sites More sharing options...
wacomuk Posted May 29, 2007 Share Posted May 29, 2007 i got this off ebay works great and clears the bonnet 139QQrdZ1QQssPageNameZWD1VQQcmdZViewItem" target="_blank">http://cgi.ebay.co.uk/DELLORT....iewItem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.