Flappa Posted May 20, 2006 Share Posted May 20, 2006 #K&N air filter #air intake with air temp probe #throttle body c/w TPS #air by-pass valve #injectors (brown) #Aluminium fuel rail #loom (was connected to MBE 967 ECU) #gasket #fixing bolts This is the standard plastic induction setup supplied with the 'Madness' kit from WF. Basically the whole thing taken off of my brand new engine as supplied by WF following upgrade to TB's at Christmas. Engine had done just 350 miles when removed. £80 the lot as pictured (+P&P if required) PM if interested. Located South B'ham Link to comment Share on other sites More sharing options...
Mal Posted May 20, 2006 Share Posted May 20, 2006 Flappa, You have a PM. Link to comment Share on other sites More sharing options...
Mal Posted May 21, 2006 Share Posted May 21, 2006 You have a second PM from me. Link to comment Share on other sites More sharing options...
Flappa Posted June 2, 2006 Author Share Posted June 2, 2006 BTTT Link to comment Share on other sites More sharing options...
Recommended Posts