JBoyall Posted April 26, 2006 Posted April 26, 2006 Got a set of 15" pro race 1 Team dynamics wheels complete with 205 and 215 tyres,never been used.going to slicks this season.Really nice in matt black.Open to a very sensible offer. Quote
scott beeland Posted April 26, 2006 Posted April 26, 2006 Sorry chaps....Been a bit preoccupied with my engine troubles and a few other things but I'll get onto it tomorrow am and post up Quote
pete g Posted April 27, 2006 Posted April 27, 2006 how are you getting on with engine, or should i not ask Quote
scott beeland Posted April 27, 2006 Posted April 27, 2006 I've got new clutch plate 70-4628 and new uprated cover 60-4628 that I'm going to trial bolt on today. Supposed to be getting cover 12-4628 aswell to try but hasn't arrived yet. Also going to measure up flywheel as some suspicion lies at that having had too much machined off its face Quote
pete g Posted April 27, 2006 Posted April 27, 2006 i would say flywheel more likely problem. dont need a lot removed .to cause problems. Quote
scott beeland Posted April 27, 2006 Posted April 27, 2006 Oh well it's that nanny state thing again. Easier to make them heavier to prevent lawyers geting fat on the claims. Wonder whether Scott is having any luck with prices & fitments etc Although I think he might be somewhat preoccupied with engine / clutch issues Wheel price will be £410 (4 of 7x15) BUT They are only available in ford fit ET42 Or Peugeot fit (same PCD but bigger centre bore) ET 18 and ET 25. Now; I'm happy to supply them but you will need to check whether these offsets will suit your particular car. Remember there are different wishbone lengths depending on car age so fitments can differ slightly. Also there is some literature out there saying the Ultralegerra is available in 6.5" width....Not for a ford stud pattern though unfortunately Quote
pete g Posted April 27, 2006 Posted April 27, 2006 thanks scott will have a ponder over .which et they look so nice Quote
robthehungrymonkey Posted April 27, 2006 Posted April 27, 2006 Oh well it's that nanny state thing again. Easier to make them heavier to prevent lawyers geting fat on the claims. Wonder whether Scott is having any luck with prices & fitments etc Although I think he might be somewhat preoccupied with engine / clutch issues Wheel price will be £410 (4 of 7x15) BUT They are only available in ford fit ET42 Or Peugeot fit (same PCD but bigger centre bore) ET 18 and ET 25. Now; I'm happy to supply them but you will need to check whether these offsets will suit your particular car. Remember there are different wishbone lengths depending on car age so fitments can differ slightly. Also there is some literature out there saying the Ultralegerra is available in 6.5" width....Not for a ford stud pattern though unfortunately Can you get them in black Scott? Quote
pete g Posted April 27, 2006 Posted April 27, 2006 that is black what is availability .can i pick up from tilbury like last time. Quote
scott beeland Posted April 27, 2006 Posted April 27, 2006 Actually it's dark graphite. I should be able to organise a Tilbury pick up for you no problem Quote
MVS Posted April 27, 2006 Author Posted April 27, 2006 I contacted Motorsport wheels and got similar info. Sadly offset not right for my car so ended up ordering Prorace 1.2's, bit peeved cos I really liked them. Thanks for trying Scott Quote
pete g Posted April 27, 2006 Posted April 27, 2006 scott can you confirm they the same as http://www.shop.ozracing.com/moda....to=FORD Quote
scott beeland Posted April 27, 2006 Posted April 27, 2006 Not yet. As far as I'm aware at the moment uk supply is only in silver and matt graphite (ie grey). We're chasing up about the matt black but I think initially it's looking like US market only and BIG sizes. Will update as soon as I know otherwise Quote
pete g Posted April 27, 2006 Posted April 27, 2006 b******* want them in matt black. just have to wait then or buy pro race thans for trying scott Quote
Rocky F Posted April 27, 2006 Posted April 27, 2006 Scott, I am intirgued by your post that mentions 6.5 inch rims. I asked Halfrauds if they could supply Ultra's in 6.5*15 at ET42 PCD 108. According to them their supplier can as they are a standard fitment for the Focus. Only available in crystal silver though. Now beleive it or not I actually need 6.5*15 ET42 and have struggled to find a decent alloy in this size for sensible money. Halfrauds price is £790 for four with R888's. Can you double check with your supplier as I am concerned Halfrauds may have got something wrong. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.