BuGsBuNnY Posted March 13, 2006 Share Posted March 13, 2006 On a bonnet with a scoop, do you need to put mesh on the front intake hole and the two holes at the rear? If not, do you need to line the edges with some sort of soft trim? Do you need a third high level brake light? Thats it for now until I come up with more... Thanks in advance! Quote Link to comment Share on other sites More sharing options...
MAT1800 Posted March 13, 2006 Share Posted March 13, 2006 Don't think the high level brake light is a necessity. In fact I'd leave it off, till after to save complications. Quote Link to comment Share on other sites More sharing options...
BuGsBuNnY Posted March 13, 2006 Author Share Posted March 13, 2006 I am not at all keen to put one on, will only do it if its an item checked on the SVA test. Quote Link to comment Share on other sites More sharing options...
MAT1800 Posted March 13, 2006 Share Posted March 13, 2006 It wasn't for me. (july 05) And I don't think it is required now. Quote Link to comment Share on other sites More sharing options...
deano.1 Posted March 13, 2006 Share Posted March 13, 2006 My car passed SVA in May last year with no mesh in the holes in the bonnet but it looks loads better with them in (IMHO). As mentioned above i wouldn't complicate things by adding anything that you don't have to have for the test i.e high level brake light. HTH Quote Link to comment Share on other sites More sharing options...
BuGsBuNnY Posted March 13, 2006 Author Share Posted March 13, 2006 Thanks, its all I needed to know! Just want to get the SVA over and done with so I can concentrate on more important stuff... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.