mr tone Posted December 2, 2005 Share Posted December 2, 2005 1700 Cross Flow 285 Cam. Duplex Timing Gear Aldon Distributor to Suit Russ Tyler Big Valve Head with Burton Rocker Cover. Lightened and Balanced. Shortened and Baffled Sump. Rolling Road approx. 130BHP (Good Torque) Lumination Ignition and Rev Limiter. Twin 40 Dellortos and Pipercross Filter Fuel Pump, Fuel Regulator + Engine Mounts 4 into 1 Stainless Manifold. Complete Ready to Fit and Go £650 ONO. would consider breaking. PM or email - rogers_monticello@hotmail.com Link to comment Share on other sites More sharing options...
Rusty Nuts Posted December 2, 2005 Share Posted December 2, 2005 would u be willing to break if so could i have a look at the throttle linkages or are they not with the engine if not are you selling them seprately regards shindha Link to comment Share on other sites More sharing options...
slippy Posted December 2, 2005 Share Posted December 2, 2005 Hi mate where in the country are you Link to comment Share on other sites More sharing options...
Boomy Posted December 2, 2005 Share Posted December 2, 2005 I would probably take the manifold. Link to comment Share on other sites More sharing options...
jago Posted December 4, 2005 Share Posted December 4, 2005 may be interested in fuel /pump /regulator and eng mounts Link to comment Share on other sites More sharing options...
GaryD Posted December 4, 2005 Share Posted December 4, 2005 May be interested in the head Link to comment Share on other sites More sharing options...
7SE Posted December 4, 2005 Share Posted December 4, 2005 I could be interested in the block, what is the actual bore? Link to comment Share on other sites More sharing options...
Major Stare Posted December 4, 2005 Share Posted December 4, 2005 Would be interested in the 130bhp Interested in Burton Rocker cover if red in colour Link to comment Share on other sites More sharing options...
pincher Posted December 5, 2005 Share Posted December 5, 2005 would u be willing to break if so could i have a look at the throttle linkages or are they not with the engine if not are you selling them seprately regards shindha I have Twin spring linkage you can have.Bolt on top of webbers. Ian. Link to comment Share on other sites More sharing options...
Recommended Posts