will maskell Posted October 15, 2005 Share Posted October 15, 2005 SOLD....SOLD...SOLD...SOLD...SOLD...SOLD...SOLD...SOLD...SOLD... Thanks to everyone that showed intrest in parts but as stated really wanted to sell outright which as of today i did so...to a good friend jason smith....who now has 2!!!!!! take care all Hi all,due to change of plans with life i no longer have the money or will to finish this car. would like to sell as one lot at the right price or may ebay the lot. so as follows; chassis 1990 never registered or been on the road,it is wide and indipendant(takes westfield caseing) the chassis has been stripped and re-powder coated,with following mods to chassis before doing so...floor mounted pedals,updated steering column mounts,new head light brackets,seat mounting bars fitted,4 point harness eyes................. fully repanelled with all panels being powder coated black before fitting........... front end; westfield quick rack with alloy mounts. new style avo shocks with poly bushes. westfield alloy uprights. standard hubs,blasted and powder coated(no bearings)with as new discs. all wish bones re-powder coated and fitted with poly bushes. rear end; new style avo shocks with poly bushes. all wishbones re-powder coated and fitted with poly bushes. westfield alloy uprights. drum brakes with new cylinders and shoes. drive shafts stripped and re-powder coated. westfield diff caseing mint with new style mounting bushes and seals. 3.89 diff supplied(non lsd) other stuff; upper steering column with keys. lower column,fresh powder coated. prop shaft to suit type 9. type 9 gearbox gear lever extension(westfield) rac roll bar. full loom. 16v 2.0 xe vauxhall engine(ready for strip/re build). 5 off 6x13 minilite wheels re finished black with 5 brand new avon zv-1 tyres. brand new oil cooler,braided hoses,take off plate,remote housing,thermostat. air horns. kenlowe fan. exhaust heat sheild. stainless exhaust manifold. westfield indicator pods(new). omex clubman rev limiter. hand brake. handbrake cable. clutch cable. rear lights. caterham fuel dial. caterham oil pressure dial. caterham water temp dial. red top fuel pump. filter king. black wide body fixed arch body tub that has been fitted and will need a little work due to swept wings originally being fitted,other than that in as new condition. red nose cone, black scuttle fitted with one of my aeroscreens www.aerodynamix.co.uk. black bonnet uncut(no carb holes). 185 black cycle wings(undrilled). As you can see plenty of stuff there with only a few bits to get,have spent a great deal off money getting it this far and would see someone on the road in a great car for next summer maybe. there will also prob be available a three drawer tool cabinet on wheels full of quality tools ie; quality torque wrench(sykes pikavant) spanners,sockets,rachets(facom), facom extension bars,breaker bars,rivnut gun etc etc..build stands...boxs of stainless cap heads,washers...rs alloys(black) with avon slicks...cable ties..yada yada yada. Anybody welcome to come and look this weekend. £2,800 contact me on 07814 132151 If i dont get a sensible offer it will eventually find its way on to ebay in bits and i will prob be able to retire with the proceeds if not sold this weekend as complete lot then will break next week.prices as follows; panelled chassis inc brand new floor mounted pedal set £550 pro race avo,s with poly bushes ,4 off brand new. £280 front wishbones,re powder coated,new ploy bushes,all joints and fitting bolts £150 rear wishbones "as above" £160 quick rack brand new £90 alloy rack mounts £35 loom £100 alloy front uprights £145 alloy rear uprights with refurbed drums £160 rear westfield alloy diff housing with 3.89 diff £150 brand new drive shafts for above new powder coat £180 rac roll bar brand new fixed rears £100 upper column with keys £60 lower column new powder coat £40 5 off 6 x 13 minator alloys blasted and refinished in black fitted with unused avon zv-1 tyres £300 oil cooler brand new £39 thermo for above £15 take off for above £20 remote housing for above £25 two 4 ft lenghts off braided hose with fittings £30 omex rev limiter (used) £30 caterham badged oil press,water temp,fuel 52mm gauges with fittings(no senders) £50 red top 16v stainless exhaust manifold £100 front indicator pods(new style) £35 rear lights and reverse light £20 complete bodywork (see description above) £320 red top engine for rebuild non coscast £150 type 9 box £35 prop shaft to suit type9/english diff £70 gear lever extension as new £50 red top pump and filter king £60 4 0ff rs alloys(black) with very worn avon slicks!! £60 cortina hubs with solid discs refurbed but need bearings £50 all collection or plus postage. Link to comment Share on other sites More sharing options...
Buzz Billsberry Posted October 15, 2005 Share Posted October 15, 2005 If u split it give me 1st dibs on the RAC Bar AVO shocks (need open and closed lengths please) Cheers Buzz Link to comment Share on other sites More sharing options...
mark.anson Posted October 15, 2005 Share Posted October 15, 2005 Hi all,due to change of plans with life i no longer have the money or will to finish this car. Will, dont know whats gone on here mate, but good luck for the future anyway. Mark Link to comment Share on other sites More sharing options...
will maskell Posted October 16, 2005 Author Share Posted October 16, 2005 thanks mark. Link to comment Share on other sites More sharing options...
Westy1700 Posted October 18, 2005 Share Posted October 18, 2005 Will,sorry to here of your change in plans - if you break it can i have 1st dibs on the oil cooler kit / take off etcetc - will be in chelters on thursday and often thereafter.. cheers Greg Link to comment Share on other sites More sharing options...
will maskell Posted October 19, 2005 Author Share Posted October 19, 2005 bttt with part prices. Link to comment Share on other sites More sharing options...
michaelcoombs Posted October 19, 2005 Share Posted October 19, 2005 PM re the front uprights... Link to comment Share on other sites More sharing options...
scott beeland Posted October 19, 2005 Share Posted October 19, 2005 1st dibs on rs alloys please if they're in good overall nick Link to comment Share on other sites More sharing options...
conibear Posted October 19, 2005 Share Posted October 19, 2005 sent pm earlier, re: rack mounts, oil cooler, avo's. any chance of picture of scuttle. Ian Link to comment Share on other sites More sharing options...
g1bby Posted October 19, 2005 Share Posted October 19, 2005 first dibs on filter king please will cheers Link to comment Share on other sites More sharing options...
Mark19800_0 Posted October 19, 2005 Share Posted October 19, 2005 PM Sent Regarding the Loom, Upper Column, Propshaft & Gear Lever Extension Mark Link to comment Share on other sites More sharing options...
mud Posted October 19, 2005 Share Posted October 19, 2005 vultures all of ya !!!! Link to comment Share on other sites More sharing options...
michaelcoombs Posted October 19, 2005 Share Posted October 19, 2005 vultures all of ya !!!! I see myself as more of a magpie..... collecting shiny bits i don’t need Link to comment Share on other sites More sharing options...
JeffC Posted October 19, 2005 Share Posted October 19, 2005 put me down for the stainless exhaust manifold please.... pm sent... Link to comment Share on other sites More sharing options...
Willy Posted October 20, 2005 Share Posted October 20, 2005 Put me down for the bodywork Simon Link to comment Share on other sites More sharing options...
Recommended Posts