Ray Grilli Posted March 30, 2005 Posted March 30, 2005 Crossflow engine for sale. Completed 1000mls since build. Built by Jaguar Engine Development Engineer. Details as follows (pretty similar spec to Vulcan engine sold a few weeks ago...):- 711M 1600cc block 10.6:1 compression ratio AE Hepolite pistons +0.090”. Valve posckets cut to suit cam lift/duration. Kent 244 Camshaft Vernier Duplex timing gear Ported & Polished Head fitted with new valve guides, 41.3mm Stainless Inlet and 33.7mm Stainles Exhaust valves Steel rocker posts and heavy duty rocker shaft. Vandervell bearings Box Baffled Trapdoor Shallow Sump (gives groundline level with bottom of bellhousing) High pressure oil pump Alloy front crank pulley Lightweight Flywheel, balanced bottom end incl balanced and polished Conrods & balanced pistons. Modified block breather Twin 40 Dellorto carbs and alloy inlet manifold to suit. Pipercross air filter with allo backplate. Alloy inlet trumpets. Alloy carb linkage. Lumenition Electronic Ignition System Clutch and cover to suit Type 9 gearbox 4-2-1 exhaust manifold to suit 7-type car When dyno'd gave 135bhp at the flywheel - copy of power curve available if required. Other bits included if you want them:- Engine mount brackets. Thermostat housing with filler cap (pretty rare I think) Set of 4 90thou 1300cc pistons and rings (used to give high CR in 1600c engine) Set of conrods (if i can find them) Rocker shaft and rockers Other bit's and bobs of xflows as i find them. Offers around £800 Engine Located in Kenilworth, Warwickshire. Ray Grilli 07712-439588 01926-511324
Recommended Posts