Ansoeb Posted August 21, 2023 Share Posted August 21, 2023 Hello, has anyone fitted one of these recently. How was the product quality, fitment to FW rear. Did the material drill ok for the mounting points. thanks Quote Link to comment Share on other sites More sharing options...
Alan Cutler (Adge) - Dorset AO Posted August 22, 2023 Share Posted August 22, 2023 Not recent, but fitted one to my car about 5 years ago, quality was excellent, fit was good. I used some rubber edging where it sits against the rear tub. Also fitted some of Marks carbon mirror covers, cycle wings and flared side panels, all excellent quality. 1 Quote Link to comment Share on other sites More sharing options...
Ansoeb Posted August 23, 2023 Author Share Posted August 23, 2023 Good to know. Do you remember what sort of edging it was you used and where to source it. thanks Quote Link to comment Share on other sites More sharing options...
Exitus Posted August 24, 2023 Share Posted August 24, 2023 I've not got that piece, but I do have flared sides, mirror covers, cycle wings and arch covers from Carbon NV. All brilliant bits of kit, top quality. The ones I've had to drill have drilled really nicely - good sharp metal bit went through easily and left a clean hole. Also cuts well with a metal disk on a dremel, tidying the edges with a fine sanding drum. Quote Link to comment Share on other sites More sharing options...
Stuart Davis AO - Devon Cornwall & Somerset Posted August 24, 2023 Share Posted August 24, 2023 13 hours ago, Ansoeb said: Good to know. Do you remember what sort of edging it was you used and where to source it. thanks I have the carbon half doors from NV and they are excellent. I used edging from Woolies to stop any scratching against the bodywork. Loads of options available, perhaps some would be suitable? https://www.woolies-trim.co.uk/search?pagenumber=3&viewmode=grid&orderby=0&pagesize=6&q=Trim&advs=false Quote Link to comment Share on other sites More sharing options...
Alan Cutler (Adge) - Dorset AO Posted August 24, 2023 Share Posted August 24, 2023 23 hours ago, Ansoeb said: Do you remember what sort of edging it was you used and where to source it. Sorry no. I’ve bought various sizes of rubber edging over the years from traders at classic car shows. Car Builder Solutions have a variety : https://www.carbuilder.com/uk/search?q=Edging Quote Link to comment Share on other sites More sharing options...
markcwalker Posted September 2, 2023 Share Posted September 2, 2023 waiting a while for mine now , it’s worth the wait imo however I didnt realise my mother in law would beat me to it 3 Quote Link to comment Share on other sites More sharing options...
SootySport Posted September 2, 2023 Share Posted September 2, 2023 It's about 4 months wait for carbon parts, one man business. Never been disappointed with the quality. There is an edging from CBS that finishes of thin panels perfectly with non setting glue inside and good for 2mm thick panels, I've used loads of it over the years. 1 Quote Link to comment Share on other sites More sharing options...
Stuart Davis AO - Devon Cornwall & Somerset Posted September 3, 2023 Share Posted September 3, 2023 9 hours ago, SootySport said: It's about 4 months wait for carbon parts, one man business. Never been disappointed with the quality. There is an edging from CBS that finishes of thin panels perfectly with non setting glue inside and good for 2mm thick panels, I've used loads of it over the years. Thanks. Do you have a link to that for future reference? Quote Link to comment Share on other sites More sharing options...
SootySport Posted September 3, 2023 Share Posted September 3, 2023 https://www.carbon-nv.co.uk/ Quote Link to comment Share on other sites More sharing options...
Stuart Davis AO - Devon Cornwall & Somerset Posted September 3, 2023 Share Posted September 3, 2023 27 minutes ago, SootySport said: https://www.carbon-nv.co.uk/ Sorry, I meant for the edging, do they do that too? Not sure who CBS is? Thanks Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted September 3, 2023 Share Posted September 3, 2023 55 minutes ago, Stuart Davis (fatblokestu) AO- Devon & Somerset said: Sorry, I meant for the edging, do they do that too? Not sure who CBS is? Thanks Car Builder Solutions 1 Quote Link to comment Share on other sites More sharing options...
Paul Aspden (MoFast) Posted September 3, 2023 Share Posted September 3, 2023 If you want the best rear diffuser for an FW then you need to contact Andrew Mellor at AJM. There is probably much less of a lead time. you can find Andy and Jo here https://www.facebook.com/CarbonAJMDesigns 3 Quote Link to comment Share on other sites More sharing options...
SootySport Posted September 3, 2023 Share Posted September 3, 2023 11 hours ago, Stuart Davis (fatblokestu) AO- Devon & Somerset said: Sorry, I meant for the edging, do they do that too? Not sure who CBS is? Thanks Here yer go, not in stock at the moment, I'm sure it'll be available later. https://www.carbuilder.com/uk/10-x-8mm-satin-black-u-channel-edge-trim-per-metre 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.